Author Topic: 16v braking issues  (Read 1671 times)

Offline rob026

  • Not said much yet
  • **
  • Posts: 75
  • Mk3 16v GTI
16v braking issues
« on: 31 January 2009, 13:51 »
I have a 96 2.0 16v, when I apply the brakes I get a noise that sounds similar to a playing card in the spokes of a push bike, the pedal firms up, and really bad vibrations back through the pedal, this has actually started happening when im not applying the brakes as well, which is wierd, I recently replaced o/s abs sensor which didnt fix it altough when the abs sensors are disconected the problem went  :huh: any help would be muchly appreciated :cool:

Offline spunkymonkey

  • I live here
  • *****
  • Posts: 706
  • Tepidly moist! That's what that is!
Re: 16v braking issues
« Reply #1 on: 31 January 2009, 14:15 »
its obviously an abs fault. get in on a computer and see if anything shows up.
 

Offline mush

  • Here all the time
  • ****
  • Posts: 380
Re: 16v braking issues
« Reply #2 on: 31 January 2009, 14:42 »
its obviously an abs fault. get in on a computer and see if anything shows up.

as above just get it plugged in dont waist any time on replacing parts that may not even need doing in the first place.

it will also read all your fault codes and tell you if theres a problem with anything else.

GSF charged me £10.00 to jack mine into the matrix and it came up x2 rear abs rings faulty. replaced and all is now fine. :cool:
MK2 golf 16v :-)

Offline boneybradley

  • Forum Supporter
  • Serious forum addict
  • *****
  • Posts: 9,482
  • Back in a Mk3...
Re: 16v braking issues
« Reply #3 on: 31 January 2009, 14:45 »
yeah it sounds like the abs is pulsing (working even without the brakes applied..this would normally mean a duff sensor!or two). time for vag-com and see what codes show up
Moderator of The Dub-Tug Squad!! (What some call the MK3 section!)



Full range of quality parts for your Volkswagen available at Oemandmore.co.uk

Offline mush

  • Here all the time
  • ****
  • Posts: 380
Re: 16v braking issues
« Reply #4 on: 31 January 2009, 14:50 »
I have a 96 2.0 16v, when I apply the brakes I get a noise that sounds similar to a playing card in the spokes of a push bike, the pedal firms up, and really bad vibrations back through the pedal, this has actually started happening when im not applying the brakes as well, which is wierd, I recently replaced o/s abs sensor which didnt fix it altough when the abs sensors are disconected the problem went  :huh: any help would be muchly appreciated :cool:

altough when the abs sensors are disconected

before you have it tested make sure you connect what ever you disconnected is re-connected as this would be a waist of time other wise
MK2 golf 16v :-)

sharpie

  • Guest
Re: 16v braking issues
« Reply #5 on: 31 January 2009, 14:50 »
rather than wasting time/money plugging it into a computer to determine whether or not it's the abs, pull the abs fuse and try it to see if it still does it.

could well be a warped disc.

Offline rob026

  • Not said much yet
  • **
  • Posts: 75
  • Mk3 16v GTI
Re: 16v braking issues
« Reply #6 on: 31 January 2009, 17:39 »
VAG com it is thanks for your help guys :smiley:

Offline Khare

  • Serious forum addict
  • *
  • Posts: 7,627
  • The bear that khares
Re: 16v braking issues
« Reply #7 on: 31 January 2009, 17:43 »
rather than wasting time/money plugging it into a computer to determine whether or not it's the abs, pull the abs fuse and try it to see if it still does it.

could well be a warped disc.
I have a 96 2.0 16v, when I apply the brakes I get a noise that sounds similar to a playing card in the spokes of a push bike, the pedal firms up, and really bad vibrations back through the pedal, this has actually started happening when im not applying the brakes as well, which is wierd, I recently replaced o/s abs sensor which didnt fix it altough when the abs sensors are disconected the problem went

sharpie read before you post.

sharpie

  • Guest
Re: 16v braking issues
« Reply #8 on: 31 January 2009, 17:44 »
rather than wasting time/money plugging it into a computer to determine whether or not it's the abs, pull the abs fuse and try it to see if it still does it.

could well be a warped disc.
I have a 96 2.0 16v, when I apply the brakes I get a noise that sounds similar to a playing card in the spokes of a push bike, the pedal firms up, and really bad vibrations back through the pedal, this has actually started happening when im not applying the brakes as well, which is wierd, I recently replaced o/s abs sensor which didnt fix it altough when the abs sensors are disconected the problem went

sharpie read before you post.

nah more time posting less time reading