GolfGTIforum.co.uk

Model specific boards => Golf mk2 => Topic started by: Dec on 21 September 2008, 21:50

Title: Exhaust Rubber
Post by: Dec on 21 September 2008, 21:50
Hey guys,

Fitted a new backbox on my car yesterday but its heavier than my standard one. Just wondering if replacing with another original one would do the job to hold it? Not sure if the fact the other one is 18 years old has weakened it?

Its just hanging a bit too low compared to what the old one was. Any other tips?

Pic:

(http://i94.photobucket.com/albums/l96/Dec_012/DSCN3077.jpg)
Title: Re: Exhaust Rubber
Post by: sharpie on 21 September 2008, 21:57
new original one should do the job, might be that the hangers need adjusting.

if not you can get polyeurethane ones on ebay and the usual polyflex bush companies, just cost a wee bit more but they'll no move about as much
Title: Re: Exhaust Rubber
Post by: Khare on 21 September 2008, 21:58
nice volksbits exhasut mate :wink: same as mine.

They hang low from factory mate. thats volksbits for ya! I used about 20 plastic zip ties to hold it firmly in place. Now its held up nicely and doesnt move at all.
Title: Re: Exhaust Rubber
Post by: Garza on 21 September 2008, 22:00
I've added a few cable ties to hold my exhaust up and stop it banging on the rear beam... quick and cheap, does the job. I found the original rubbers perish quickly, especially if u have a heavy back box. I know some ppl use jubilee clips too.

G
Title: Re: Exhaust Rubber
Post by: cняis on 21 September 2008, 23:02
i need cable ties to assist my centre box mount rubber... the powerflow system hangs low in the middle which means the tailpipe doesnt sit level....

mmm wonky

(http://i176.photobucket.com/albums/w167/crevice1984/HPIM1701b.jpg)
Title: Re: Exhaust Rubber
Post by: rubjonny on 22 September 2008, 11:11
or purchase a couple of heavy duty zaust rubbers:
893 253 147 D - heavy duty zaust rubber - £  5.09

replaces the figure 8 type rubber on the rear silencer and the one at the back of the backbox i.e. not the 2 o'ring rubbers that are next to each other at the front of the backbox.  Though I guess they would work there too?
Title: Re: Exhaust Rubber
Post by: Dec on 22 September 2008, 21:38
Ahh sweet thanks for that mate! Take it thats the VW Part number? Would I still be able to get one from VW themselves?
Title: Re: Exhaust Rubber
Post by: daniel-1986 on 22 September 2008, 21:50
i havnt got a volksbits exhaust but a mild stainless steel backbox which hits the bodywork which tyresales couldnt sort even for free
Title: Re: Exhaust Rubber
Post by: Jay on 22 September 2008, 21:54
i havnt got a volksbits exhaust but a mild stainless steel backbox which hits the bodywork which tyresales couldnt sort even for free
They're a company, they're there to make a profit... why would they sort it for free?  :huh:
Title: Re: Exhaust Rubber
Post by: rubjonny on 22 September 2008, 22:00
yep thats the vag part number :)
Title: Re: Exhaust Rubber
Post by: daniel-1986 on 23 September 2008, 12:18
i havnt got a volksbits exhaust but a mild stainless steel backbox which hits the bodywork which tyresales couldnt sort even for free
They're a company, they're there to make a profit... why would they sort it for free?  :huh:

the bloke readjusted the backbox, replaced two rubbers and fitted two new clamps for free