GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: p4sty on 17 July 2012, 16:11
-
Hi
Just wondering does the s3 maf fit straight onto a golf mk4 1.8t agu ??
Or does the plug have to be changed ?
Thanks
-
no, different plug you need the vr6 or custom one.
-
I think you have to remove the sensor and swap it out with your 1.8t one.
Thats what Iv done with my vr6 one.
-
Depends on ur engine code ,
-
I think you have to remove the sensor and swap it out with your 1.8t one.
Thats what Iv done with my vr6 one.
+1 from what I have read
-
AGU - VR6 housing with AGU sensor :cool:
-
Right so I need a vr6 maf and an agu maf ( as I don't have either ) then ??
I take it I just un screw the 2 screws by the plug on both and then put the agu sensor on the vr6 maf ?
Also isn't the vr6 maf the same as an s3 or lcr maf ??
-
how come you don't have either? Just use your current one with a VR6 housing
and no they aren't the same
-
You need a 2.75ID one. WAs sensors over so 1.8T sensor is in VR6 housing.
-
Because I bought the car half stripped so quite a few things were missing ..
Right I'll order a vr6 maf and an agu one aswel then :-/
Cheers peeps