GolfGTIforum.co.uk

Model specific boards => Golf mk3 => Topic started by: KIN9DUB on 06 June 2012, 17:00

Title: new maf, same problem
Post by: KIN9DUB on 06 June 2012, 17:00
so i've just been and got a new maf sensor n i'm still getting the problem when i plug the electric plug back in, judering and loss of power then suddenly kicks in, when  removed its fine. could it be the actual plug or something like that?? might have to see about putting it on a vagcom, if that will show up what the fault is? on the up side i went scrappy and got new door strip which was needed and another spare maf sensor and air pipe etc new door handle. 15 rupees. not bad.
Title: Re: new maf, same problem
Post by: tweed on 06 June 2012, 18:41
Told you to check all pipes after the sensor. If air is getting in after the sensor it will cause it to do that! Get for vacuum pipes etc
Title: Re: new maf, same problem
Post by: KIN9DUB on 06 June 2012, 20:53
chill out.. i have checked the pipes etc, fully checked them. i've sorted it now anyway.. cheers
Title: Re: new maf, same problem
Post by: Luke1981 on 06 June 2012, 21:05
Well what was the problem then?
Title: Re: new maf, same problem
Post by: Bandit127 on 06 June 2012, 21:11
Yeah - cough up bud... 3 years from now some poor soul on Google with exactly the same problem as you is going to need the solution.
Title: Re: new maf, same problem
Post by: Shady Pioneer on 06 June 2012, 21:37
It's all very well replacing the MAF but you may find that there's a fault code that will still be showing up so get it plugged into VAGCOM and clear the code. :afro:
Title: Re: new maf, same problem
Post by: Wayne on 06 June 2012, 21:52
Or you may find the new maf is faulty
Title: Re: new maf, same problem
Post by: tweed on 06 June 2012, 22:41
chill out.. i have checked the pipes etc, fully checked them. i've sorted it now anyway.. cheers


I'm so chilled my sweat turns to ice.

Caugh up then?
Title: Re: new maf, same problem
Post by: KIN9DUB on 07 June 2012, 16:15
i changed all the pipes to the sensor, and the maf sensor and the metal pipe it's attatched to, cleaned all of it aswell with contact cleaner and it seemes to have work. so new maf wasn't faulty, must have been something else. like you said tweed, it could have been the pipes. but changed the whole lot and it's running a lot better, just abit jumpy on the idle. cheers for the help anyway.. :smiley:
Title: Re: new maf, same problem
Post by: tweed on 07 June 2012, 19:12
The main thing is it's working  :smiley:

Go have some fun
Title: Re: new maf, same problem
Post by: KIN9DUB on 07 June 2012, 19:24
yeah, i'm just relieved it only cost me 20 quid in all to sort it.. and got side strip and door handle. not bad. was suprised how many mk3 gti's they had at the scrappy. half of them looked half decent to be honest