GolfGTIforum.co.uk
Model specific boards => Golf mk2 => Topic started by: apie2004 on 08 January 2011, 16:36
-
I have a 88 mk2 golf 8v digi.
Here is my problem from the drivers seat. Both of my sidelights work (first position of the switch). On dipped lights (second position) only the left hand side light comes on dipped and the right stays at sidelight. On main beam the inner left hand side light lights up and the outside left is on dipped, on the right hand side on main beam the inner right hand side light does not light up and the outer light stays on dipped.
What should happen at each setting? Does anyone have a wiring diagram for the headlights? I bought an uprated headlight loom of ebay (easy out as I dont have much time to work on my car!) and the first step is to disconnect a plug with two wires coming from it (yellow and black) which is in front of the battery and attached to the chassis, I couldn't find it on my car! Any suggestions?
Cheers
apie
-
Have you disconnected the dim-dip resistor?
-
Yes, packet of polo shaped with a yellow wire going into each end of it?
-
check ur middle spots m8 and also the fuse for main lights i had this on my old golf the fuse was blown but due to one of the spots lights shorting out
-
Check your bulbs by taking them out, holding them up to a light, and gently flicking the glass, a wobbly element means the bulb has blown, I've seen this problem many times, and is nearly always, one or more blown bulbs!
Thom
-
Check your bulbs by taking them out, holding them up to a light, and gently flicking the glass, a wobbly element means the bulb has blown, I've seen this problem many times, and is nearly always, one or more blown bulbs!
Thom
First thing I did was to replace all the bulbs with known working ones
-
Switch?
Relay?
-
Switch?
Relay?
I've heard there are different headlight switches, is this true?
Which relay am I after?
Cheers
J
-
there is a separate fuse for dipped and main for each side, so 4 in total. check em all :)
with the relayed lighting loom does it do the main lamps, plus also the spot lamps, or just the main lamps?
there are at least 3 headlight switches available, but in this case the switch is irrelevant as all the power for dipped/main comes via the flasher switch in the indicator stalk. there are no relays for the factory wiring, though there might be a faulty relay in your aftermarket loom?
-
I havent fitted the uprated loom yet because I couldnt find the plug described, I shall have a check of the fuses tonight
-
ah the plug mentioned is the dim dip resistor which you already unplugged, dunno why its said to be in front of the battery cos it isn't!
-
After a quick play with fuses I have both of the headlights working on dipped. Changed the fuses for the spots but still only the left one works.
What is meant to happen with the lights? I'm guessing outers do sides and dips and the spots do main with the outer lights dipped?
-
outers do both dim and main, innerd just main. there are 2 seperate filaments in the outer bulbs, so its possible for main beam to be blown while dipped still works. tho if it doesnt work on the spot light either that suggests the issue is elsewhere though the spot bulb could be blown too :tongue:
the earth wires are ok because your dipped beam works, so its just the fuse or main beam wire thats gone on that side. for an easy life just fit your uprated headlight loom, it takes 2 triggers from the old H4 plug and iff main beam works on the left side its all good as thats the one you need to plug your loom in anyway
-
you are my hero. I'll let everyone know what happens
-
outers do both dim and main, innerd just main. there are 2 seperate filaments in the outer bulbs, so its possible for main beam to be blown while dipped still works. tho if it doesnt work on the spot light either that suggests the issue is elsewhere though the spot bulb could be blown too :tongue:
the earth wires are ok because your dipped beam works, so its just the fuse or main beam wire thats gone on that side. for an easy life just fit your uprated headlight loom, it takes 2 triggers from the old H4 plug and iff main beam works on the left side its all good as thats the one you need to plug your loom in anyway
My money is still on the duff bulb theory.....
Thom