GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: andc1 on 18 December 2010, 19:04
-
will these fit mine, i have a 99 agu, add says with no centre display but i have the same warning lights except handbrake light and also i have underneath a screen telling me when i need fuel/water etc
http://cgi.ebay.co.uk/VW-MK4-BORA-SPORT-CLOCK-OVERLAY-INSTRUMENT-CLUSTER-FIS-/160520093381?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item255fbe3ec5
-
Wez is the man to answer this one :smiley:
-
come on wez!!!
-
i think they are immo2, not sure if yours are immo1 being with out the display but if all the lights are in the right place then it`ll be fine.
could just cut out the screen bit if thats the case, just make sure first thought...lol
-
They will fit but ideally you need to get your foils out and compare the position of the symbols.
MK4 Golfs (even the very early ones) are either immo 2 or post 2001 are immo 3. Don't worry about the extra bit in the middle as they are none FIS foils but they can be cut to suite your cluster using your existing foils as a template :afro:
-
Wez is the man to answer this one :smiley:
Or of course Neil the clocks expert :laugh: :cool:
-
Wez is the man to answer this one :smiley:
Or of course Neil the clocks expert :laugh: :cool:
:grin: :grin: :grin:
-
heres my clocks
(http://i666.photobucket.com/albums/vv25/scoobygolf/photo1-8.jpg)
-
The foils are £30 something, while there are immo2 sport clusters going for arround the £60 mark on ebay, just a thought especially as you will need rings and needles to complete the cluster....
Ideally you need to match ALL the symbols to the foil, from the ones I can see you should be OK but the ones in the rev counter can't be seen or the ones that aren't illuminated.
-
true but rings are only £20 and i believe mk5 needles fit? it will cost me £20 to recode new clocks in then milege correction,
1 question tho, when i take my clocks out will i have issues when i refit? due to immobiliser being part of the clocks
-
At first glance no they won't fit as the immobiliser icon is in a different position (compare it to the 70 on the rev counter)
-
slightly off? yea think i can see it, what about these? unless you can sort me out a set? i hear your the man on clocks, foils or complete set im not fussed!
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=140489654756&ssPageName=STRK:MEWAX:IT
-
http://cgi.ebay.co.uk/VW-MK4-BORA-SPORT-CLOCK-OVERLAY-INSTRUMENT-CLUSTER-FIS-/150534937994?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item230c94dd8a
these will sit better in yours
-
no there diferent, 4 symbols across in the middle, mine only has 3!
-
you'll need to cut and shut them like I did mate
immobiliser symbol is wrong though
-
wazz these are a what im after yea?
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=140489654756&ssPageName=STRK:MEWAX:IT
-
????
-
TBH it's a complete minefield buying the foils, I was a just lucky that shakey had a set that matched my original ones. That said I still had to cut the centre section out as the Bora foils had 8 icons rather than 6
-
see my latest link mate theres a gen set of clocks on ebay going!
-
yes they would go in yours once coded :smiley:
-
cheers, lets hope they dont go for loads!