GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: Ivor Mk4 Turbo on 15 February 2009, 15:13
-
Driving back from football this morning, & thought I'd go the long way round, down some good country lanes. :evil:
Dropped it into 3rd to have a run up a slight incline. Revs rose all the way around a little TOO quickly - I thought I'd missed the gear. Tried it again, revs do the exact same thing.
Sayonara clutchy......................................................... :cry:
-
Perfect time to upgrade to G60 setup ivor
-
Perfect time to upgrade to G60 setup ivor
Yes, certainly looks that way - Could just do w/o it ATM, though. :(
-
Lucky you dont have a diesel :laugh:
Its crap just one thing after another :angry:
-
I have my kit ready and waiting for when mine goes :wink:
-
Driving back from football this morning, & thought I'd go the long way round, down some good country lanes. :evil:
Dropped it into 3rd to have a run up a slight incline. Revs rose all the way around a little TOO quickly - I thought I'd missed the gear. Tried it again, revs do the exact same thing.
Sayonara clutchy......................................................... :cry:
Thats bad news ivor :cry: tho least you can ditch the s**t dualmass flywheel :wink:
-
I have my kit ready and waiting for when mine goes :wink:
Need someone to keep it warm for you?! :D
-
Lucky you dont have a diesel :laugh:
Praise the Lord!! :D
-
Driving back from football this morning, & thought I'd go the long way round, down some good country lanes. :evil:
Dropped it into 3rd to have a run up a slight incline. Revs rose all the way around a little TOO quickly - I thought I'd missed the gear. Tried it again, revs do the exact same thing.
Sayonara clutchy......................................................... :cry:
Thats bad news ivor :cry: tho least you can ditch the s**t dualmass flywheel :wink:
:afro:
Need to start pricing the bits up, though, which is a pain. :(
-
yup awesome do a kit but its pricey. Can source the bits cheaper yourself
-
Get the flywheel from a mk316Valve(abf)around £20 from a scrappy,and the clutch is about £90 :wink:
-
Couldnt you just get the whole setup from a mk3 VR6 ?
-
Couldnt you just get the whole setup from a mk3 VR6 ?
No, the F/W is different. You need VR6 clutch & G60/Mk3 16v F/W. :afro:
-
Ah you learn something new every day :grin:
-
Clutch
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=300257837169
Flywheel
http://cgi.ebay.co.uk/GOLF-MK3-16V-02A-FLYWHEEL-FOR-1-8T-CONVERSION_W0QQitemZ390031330722QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item390031330722&_trksid=p3286.c0.m14&_trkparms=72:1689|66:2|65:12|39:1|240:1318
-
sods law.. i've just binned a G60 flywheel you could've had :undecided:
-
Unlucky Ivor. you know, that's borderline a cheap upgrade that is :afro:
-
topher what are you playing at :shocked:
-
it was on a spare G60 block which got fecked when the garage flooded.. couldn't be bothered to unbolt the fly so just bunged the whole thing in the boot of a car we were scrapping and weighed it in
-
sods law.. i've just binned a G60 flywheel you could've had :undecided:
:D No worries, mate. :afro:
This always happens to me! I PM'd a user on Briskoda about a 5mm Michy tyre he was selling for £5, & he had threw it out that morning, LOL!! :D
-
Clutch
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=300257837169
Flywheel
http://cgi.ebay.co.uk/GOLF-MK3-16V-02A-FLYWHEEL-FOR-1-8T-CONVERSION_W0QQitemZ390031330722QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item390031330722&_trksid=p3286.c0.m14&_trkparms=72:1689|66:2|65:12|39:1|240:1318
Cheers, Patch. :afro:
The clutch seems a good price, although I don't know whether to spend the extra on a Sachs?? :undecided:
F/W seems a tad expensive, TBH. I may just stick a £10 ABF special in, as they don't really go wrong??
-
http://www.golfgtiforum.co.uk/index.php?topic=104043.0
Fitted one off these last week on probs
-
http://www.golfgtiforum.co.uk/index.php?topic=104043.0
Fitted one off these last week on probs
No chatter or vibration?
-
no perfectly fine bud
-
Shame ivor :cry: :cry:
As said no vibration well worth doing IMO
Oh and i went with sachs clutch not the cheapest but read this:
http://www.golfgtiforum.co.uk/index.php?topic=105143.0 :shocked:
-
Shame ivor :cry: :cry:
As said no vibration well worth doing IMO
Oh and i went with sachs clutch not the cheapest but read this:
http://www.golfgtiforum.co.uk/index.php?topic=105143.0 :shocked:
Wasn't LUK, then, but the wrong clutch kit.
Might still get Sachs anyhow! :P
-
Shame ivor :cry: :cry:
As said no vibration well worth doing IMO
Oh and i went with sachs clutch not the cheapest but read this:
http://www.golfgtiforum.co.uk/index.php?topic=105143.0 :shocked:
Wasn't LUK, then, but the wrong clutch kit.
Might still get Sachs anyhow! :P
Indeed - someone said thay had an luk fall apart :undecided:
Sachs FTW anyway as you say :laugh:
-
http://cgi.ebay.co.uk/VW-GOLF-GTI-SKODA-AUDI-SEAT-1-8-TURBO-20v-SPORTS-CLUTCH_W0QQitemZ260359666492QQihZ016QQcategoryZ9889QQtcZphotoQQcmdZViewItem
I got the 5 paddle version on my 4x4 turbo which will allow fulll throttle drag starts at Pod with no wheel spin or slip at 300+bhp 380lbft. plus my mates 500bhp Astra with LDS runs on one with no problem spinning the wheel at 120mph shifting upto 6th gear..
V good clutch imo, and for the money you cannot go wrong.
We are going to fit one to Ben Golf towards the end of the week. It cannot cope with the gen4 remap which peaks at 23psi and holds 18psi.. :grin:
Nick
-
http://cgi.ebay.co.uk/VW-GOLF-GTI-SKODA-AUDI-SEAT-1-8-TURBO-20v-SPORTS-CLUTCH_W0QQitemZ260359666492QQihZ016QQcategoryZ9889QQtcZphotoQQcmdZViewItem
I got the 5 paddle version on my 4x4 turbo which will allow fulll throttle drag starts at Pod with no wheel spin or slip at 300+bhp 380lbft. plus my mates 500bhp Astra with LDS runs on one with no problem spinning the wheel at 120mph shifting upto 6th gear..
V good clutch imo, and for the money you cannot go wrong.
We are going to fit one to Ben Golf towards the end of the week. It cannot cope with the gen4 remap which peaks at 23psi and holds 18psi.. :grin:
Nick
gen 4 re map :shocked: mmmm whens this available nick? any other mods need carrying out or uprating?
-
http://cgi.ebay.co.uk/VW-GOLF-GTI-SKODA-AUDI-SEAT-1-8-TURBO-20v-SPORTS-CLUTCH_W0QQitemZ260359666492QQihZ016QQcategoryZ9889QQtcZphotoQQcmdZViewItem
I got the 5 paddle version on my 4x4 turbo which will allow fulll throttle drag starts at Pod with no wheel spin or slip at 300+bhp 380lbft. plus my mates 500bhp Astra with LDS runs on one with no problem spinning the wheel at 120mph shifting upto 6th gear..
V good clutch imo, and for the money you cannot go wrong.
We are going to fit one to Ben Golf towards the end of the week. It cannot cope with the gen4 remap which peaks at 23psi and holds 18psi.. :grin:
Nick
gen 4 re map :shocked: mmmm whens this available nick? any other mods need carrying out or uprating?
lol I thought you would pipe up. I dont think the gen 4 will be used on main stream customers cars. Just been playing with some information I found out the other day by translation a lot of german PDF docs.
Nick
-
http://cgi.ebay.co.uk/VW-GOLF-GTI-SKODA-AUDI-SEAT-1-8-TURBO-20v-SPORTS-CLUTCH_W0QQitemZ260359666492QQihZ016QQcategoryZ9889QQtcZphotoQQcmdZViewItem
I got the 5 paddle version on my 4x4 turbo which will allow fulll throttle drag starts at Pod with no wheel spin or slip at 300+bhp 380lbft. plus my mates 500bhp Astra with LDS runs on one with no problem spinning the wheel at 120mph shifting upto 6th gear..
V good clutch imo, and for the money you cannot go wrong.
We are going to fit one to Ben Golf towards the end of the week. It cannot cope with the gen4 remap which peaks at 23psi and holds 18psi.. :grin:
Nick
gen 4 re map :shocked: mmmm whens this available nick? any other mods need carrying out or uprating?
lol I thought you would pipe up. I dont think the gen 4 will be used on main stream customers cars. Just been playing with some information I found out the other day by translation a lot of german PDF docs.
Nick
lol ah right i see nick aye might of known i would have commented soon as i saw gen4 :smiley: never mind eh still im chuffed enough with the gen3 you n ben did but gen4 :cry: :cry:
-
http://cgi.ebay.co.uk/VW-GOLF-GTI-SKODA-AUDI-SEAT-1-8-TURBO-20v-SPORTS-CLUTCH_W0QQitemZ260359666492QQihZ016QQcategoryZ9889QQtcZphotoQQcmdZViewItem
I got the 5 paddle version on my 4x4 turbo which will allow fulll throttle drag starts at Pod with no wheel spin or slip at 300+bhp 380lbft. plus my mates 500bhp Astra with LDS runs on one with no problem spinning the wheel at 120mph shifting upto 6th gear..
V good clutch imo, and for the money you cannot go wrong.
We are going to fit one to Ben Golf towards the end of the week. It cannot cope with the gen4 remap which peaks at 23psi and holds 18psi.. :grin:
Nick
gen 4 re map :shocked: mmmm whens this available nick? any other mods need carrying out or uprating?
lol I thought you would pipe up. I dont think the gen 4 will be used on main stream customers cars. Just been playing with some information I found out the other day by translation a lot of german PDF docs.
Nick
lol ah right i see nick aye might of known i would have commented soon as i saw gen4 :smiley: never mind eh still im chuffed enough with the gen3 you n ben did but gen4 :cry: :cry:
Gen 4!!! :drool:
I'm not even at Gen 3, yet. :cry:
I'm short of a FMIC, 4 bar fuel pump/fpr, though. :(
-
Ooh, yeah..................................................... & also short of an uprated clutch! :D
-
Ooh, yeah..................................................... & also short of an uprated clutch! :D
was about to say that :lipsrsealed: hope mine will be ok for now :grin:
-
+1 matt hope mine is ok
-
When you have a car remapped and the clutch uprated, is there anything else to consider, ie, upgrade any other engine components to stop something going pop???
I've got some money coming my way and I can't decide; remap and upgraded clutch, or -30mm drop and wheels...?
-
When you have a car remapped and the clutch uprated, is there anything else to consider, ie, upgrade any other engine components to stop something going pop???
I've got some money coming my way and I can't decide; remap and upgraded clutch, or -30mm drop and wheels...?
Not as far as I'm aware the engine will cope with 190-205bhp easy. Once you've got the car remaped I'd recomend suspension work as it poor as standard.
-
Corrado G60/2.0 16v flywheel & Sachs VR6 clutch now fitted. 8)
Pedal very light - No chatter on idle - & most importantly, no more slip! (http://i42.photobucket.com/albums/e345/ivormk4/Smileys/smoke.gif)
-
Worthy replacement then ivor, or only if the D/M fails?
Sam
-
Worthy replacement then ivor, or only if the D/M fails?
Sam
The DM didn't fail - It's in good nick! The clutch was foobarred, but I have seen worse, though!
Deffo worth doing, considering the higher price of the standard items which can't take as much torque as the SM/VR6 combo. ;)
-
top work ivor
-
Corrado G60/2.0 16v flywheel & Sachs VR6 clutch now fitted. 8)
Pedal very light - No chatter on idle - & most importantly, no more slip! (http://i42.photobucket.com/albums/e345/ivormk4/Smileys/smoke.gif)
Well worth it eh? I love my set up :afro:
-
Yes, very impressed with it so far, thanks. Can't believe how light & smooth it is, TBH. :)
-
Yes, very impressed with it so far, thanks. Can't believe how light & smooth it is, TBH. :)
:afro: - Need to update your sig again :evil:
Whats next then :evil:
-
nice one ivor pleased you have your new clutch all sorted top job :afro:
-
My clutch is still fine *touch wood* have stopped worrying about it going when it does will just have to pay out for a new one
-
:afro: - Need to update your sig again :evil:
Think I'm going to have to employ a PA at the rate that needs changing!! :D
Whats next then :evil:
Still so much to I want to do, LOL! :D
Forge SMIC/FMIC
4 bar FPR/Pump (If worthwhile)
5 piece hose kit
7 piece coolant hose kit
ATB diff
R32 st. rack
Rear ARB
Coilovers
256mm rear brakes
Non-res Anni style cat back
Anni rear valance
R32 front bumper
R32 st. wheel
Buckets
C/F Bonnet
Perspex windows
R32 clocks
Oh yeah........................ & a more :evil: R-Tech map, of course! :D
-
nice one ivor pleased you have your new clutch all sorted top job :afro:
Cheers, pal. :afro:
-
:afro: - Need to update your sig again :evil:
Think I'm going to have to employ a PA at the rate that needs changing!! :D
Whats next then :evil:
Still so much to I want to do, LOL! :D
Forge SMIC/FMIC
4 bar FPR/Pump (If worthwhile)
5 piece hose kit
7 piece coolant hose kit
ATB diff
R32 st. rack
Rear ARB
Coilovers
256mm rear brakes
Non-res Anni style cat back
Anni rear valance
R32 front bumper
R32 st. wheel
Buckets
C/F Bonnet
Perspex windows
R32 clocks
Oh yeah........................ & a more :evil: R-Tech map, of course! :D
PMSL @ PA true tho :evil:
Nice list :laugh: I can see no end in sight sir!!! :grin:
-
:afro: - Need to update your sig again :evil:
Think I'm going to have to employ a PA at the rate that needs changing!! :D
Whats next then :evil:
Still so much to I want to do, LOL! :D
Forge SMIC/FMIC
4 bar FPR/Pump (If worthwhile)
5 piece hose kit
7 piece coolant hose kit
ATB diff
R32 st. rack
Rear ARB
Coilovers
256mm rear brakes
Non-res Anni style cat back
Anni rear valance
R32 front bumper
R32 st. wheel
Buckets
C/F Bonnet
Perspex windows
R32 clocks
Oh yeah........................ & a more :evil: R-Tech map, of course! :D
PMSL @ PA true tho :evil:
Nice list :laugh: I can see no end in sight sir!!! :grin:
No.............................................
(http://i42.photobucket.com/albums/e345/ivormk4/neverendingstorydvdcover.jpg)
:D
-
Ooh, er...... I forgot the Anni sideskirts! :laugh:
-
lol :grin: :grin: :grin: :grin:
-
http://cgi.ebay.co.uk/VW-GOLF-GTI-SKODA-AUDI-SEAT-1-8-TURBO-20v-SPORTS-CLUTCH_W0QQitemZ260359666492QQihZ016QQcategoryZ9889QQtcZphotoQQcmdZViewItem
I got the 5 paddle version on my 4x4 turbo which will allow fulll throttle drag starts at Pod with no wheel spin or slip at 300+bhp 380lbft. plus my mates 500bhp Astra with LDS runs on one with no problem spinning the wheel at 120mph shifting upto 6th gear..
V good clutch imo, and for the money you cannot go wrong.
We are going to fit one to Ben Golf towards the end of the week. It cannot cope with the gen4 remap which peaks at 23psi and holds 18psi.. :grin:
Nick
You've got a techniclutch and its good?? Theres a first!