Author Topic: were shud these wires connect 2  (Read 2008 times)

jamie16v

  • Guest
Re: were shud these wires connect 2
« Reply #10 on: 13 September 2008, 18:11 »
diagnostic use of some sort?..

Offline beccasmk3gti

  • Here all the time
  • ****
  • Posts: 317
  • golf mk3 gti and a mk3 vr6 182bhp and 223nm
Re: were shud these wires connect 2
« Reply #11 on: 14 September 2008, 08:57 »
Mine has a plug attached to it, and the plug is connected to the grey sensor in your picture.

car doesnt run properly if this is not connected i tried it on mine a 1996 vr6 and runs poor

Offline LazyLunatic

  • Forum addict
  • *
  • Posts: 4,153
  • MK3 20VT Project
Re: were shud these wires connect 2
« Reply #12 on: 14 September 2008, 09:40 »
Find a vr6 that is breaking or go to scrappy and see if you can get the loom.
Is this only on the vr6 or can it found on other models?
Get the plug and solder the wires to the wires on the new plug. Then plug it in!


LL ;)

Offline beccasmk3gti

  • Here all the time
  • ****
  • Posts: 317
  • golf mk3 gti and a mk3 vr6 182bhp and 223nm
Re: were shud these wires connect 2
« Reply #13 on: 14 September 2008, 09:43 »
vr6 only its part of the rocker breather system

Offline greendragon

  • GTI forum regular
  • ***
  • Posts: 229
Re: were shud these wires connect 2
« Reply #14 on: 14 September 2008, 16:41 »
thats wird cus the plug just clips in but theres nufink that the wires wod do cus it just a blanck plug

Offline Rmachines

  • I live here
  • *****
  • Posts: 2,901
  • Passat 20vT Estate and Candy White MK3 1.8 GL
Re: were shud these wires connect 2
« Reply #15 on: 14 September 2008, 22:23 »
my 16v ABF engine has this but im pretty sure its not a blank, mabey they share the same loom?
10 golfs and counting! 

Engine cranes = the ultimate tool to test the tensile strength of Everything you didn't disconnect!


Offline jafo

  • GTI forum regular
  • ***
  • Posts: 198
Re: were shud these wires connect 2
« Reply #16 on: 15 September 2008, 16:28 »
Yep iv def got this plug with wires on my vr because i can remember taking it all apart to clean the inside of the pipe.