rocking horse sh#t?

[Khare]

i lost interest in washing my golf last week, i washed it wednesday BEAUTIFUL day!! thursday it was full of crap again. so i thought "sod it"

[cняis]

my golfs never get washed. the project still has 2 years of barn filth all over it... 

the rain has finally rinsed off the bird crap now though!

[bigman_10]

my golfs never get washed. the project still has 2 years of barn filth all over it... 

the rain has finally rinsed off the bird crap now though!

No way  bird crap's like acid on paint work, it left nasty discolouration on my roof after i cleaned it a million times!

Next time the offending pigeon(s) are going to meet the wrong end of my slingshot!!!

[mattneck(Beavis)]

mine went into the shop to start on the prep, almost finished it all, if we had carried on yesterday it would have been completed.. but instead going to block sand the filler skim off on the sill where someone tried to jack it up, after it was stud and pulled..

all the lil dings dents anything like that have had a touch of filler skimmed and flatted, all paint is flat..

need to prime the sunny panel.. finish the sill, stonechip the inside lip of the rear arches after a tiny bit of corrosion removal, and jsut do a couple of tiny dings that havent taken a bit of a skim yet..

paint starts saturday with the roof, tailgate and bonnet off..

finished sunday then baked

back monday polished i hope, pre rebuild..

then jsut gotta get the proper bumper and trim paint onto the strips and bumper.. all in time for spring fest 

[cняis]

mine went into the shop to start on the prep, almost finished it all, if we had carried on yesterday it would have been completed.. but instead going to block sand the filler skim off on the sill where someone tried to jack it up, after it was stud and pulled..

all the lil dings dents anything like that have had a touch of filler skimmed and flatted, all paint is flat..

need to prime the sunny panel.. finish the sill, stonechip the inside lip of the rear arches after a tiny bit of corrosion removal, and jsut do a couple of tiny dings that havent taken a bit of a skim yet..

paint starts saturday with the roof, tailgate and bonnet off..

finished sunday then baked

back monday polished i hope, pre rebuild..

then jsut gotta get the proper bumper and trim paint onto the strips and bumper.. all in time for spring fest 

all that and its not even a gti 

[Khare]

i dont have a GTi either and im looking to do that kind of work. I wanna have a good looking mk2, i dnt know if to wait until im 20 or so and get a GTi (insurance is too expensive under 20) or start on my 1.6 driver.

[cняis]

i dont have a GTi either and im looking to do that kind of work. I wanna have a good looking mk2, i dnt know if to wait until im 20 or so and get a GTi (insurance is too expensive under 20) or start on my 1.6 driver.

tough call but most parts (except engine) can be carried over anyway 

[Khare]

ive just rethought of a plan, buy a 16v next year (cos insurance will b cheaper) and start with that!

[Jay]

i lost interest in washing my golf last week, i washed it wednesday BEAUTIFUL day!! thursday it was full of crap again. so i thought "sod it"

it's because it's white init? 













Did ya get it?! 

[mattneck(Beavis)]

mine went into the shop to start on the prep, almost finished it all, if we had carried on yesterday it would have been completed.. but instead going to block sand the filler skim off on the sill where someone tried to jack it up, after it was stud and pulled..

all the lil dings dents anything like that have had a touch of filler skimmed and flatted, all paint is flat..

need to prime the sunny panel.. finish the sill, stonechip the inside lip of the rear arches after a tiny bit of corrosion removal, and jsut do a couple of tiny dings that havent taken a bit of a skim yet..

paint starts saturday with the roof, tailgate and bonnet off..

finished sunday then baked

back monday polished i hope, pre rebuild..

then jsut gotta get the proper bumper and trim paint onto the strips and bumper.. all in time for spring fest 

all that and its not even a gti 

Get away you bloody somerset bumpkin 

It's all aobut progression. 

The shell was 100% solid. So this get's done now and it looks nice, then I can move onto other elements, brining them up to scratch.. oh and Speed you see