« previous next »
Pages: [1]

Author Topic: Digifant cylinder pressure?  (Read 707 times)

Offline Mk2Kezza

  • Here all the time
  • ****
  • Posts: 405
Digifant cylinder pressure?
« on: 23 August 2007, 18:24 »
I've had a look through the post and can't seem to find what the pressure in each cylinder on my 90 digipant shoud be? :undecided:

1 = 11.7
2 = 12
3 = 12
4 = 11.7

Anyone know if this sounds about right? She's done 176000 miles and hopefully will do a few more! :huh:
Logged
<br />Almost finished.....

Offline filthy

  • Here all the time
  • ****
  • Posts: 388
Re: Digifant cylinder pressure?
« Reply #1 on: 23 August 2007, 19:13 »
According to the haynes, when new, pressure should be between 10 and 13 bar, with a minimum of 7.5- yours is good! :smiley:
Logged
Having trouble keeping it on the straight and narrow?  www.powersteeringstore.co.uk

Offline Mk2Kezza

  • Here all the time
  • ****
  • Posts: 405
Re: Digifant cylinder pressure?
« Reply #2 on: 23 August 2007, 21:10 »
I've got haynes, but in my haste yesterday I couldn't blinking find it!! Thanks for that anyway.

A load off my mind as she'll going in for a MOT next week, after a new rear wheel bearing. Good to know she's all 'nice and tidy' inside, didn't want to go stripping her, opening a can of worms on a car that age with that mileage!
I think I can live with the leaking valve stem oil seals  :wink: The MOT emmission test is with a warm engine  :smug:
Logged
<br />Almost finished.....

Offline filthy

  • Here all the time
  • ****
  • Posts: 388
Re: Digifant cylinder pressure?
« Reply #3 on: 24 August 2007, 00:00 »
Yeah, I tested mine last week and got 163 to 168 psi, was quite chuffed with that!
Logged
Having trouble keeping it on the straight and narrow?  www.powersteeringstore.co.uk
Pages: [1]
« previous next »