Author Topic: Idle speed.  (Read 2023 times)

Offline Gozza

  • I live here
  • *****
  • Posts: 1,417
Idle speed.
« on: 02 December 2003, 13:28 »
Can someone tell me how to set the idle on my 1988 golf gti mark 2 16v. I know where the idle control is on the inlet, but I remember from my last golf you have to disconnect summink and plug summink up.

Can anyone remind me, pics of the bits I need to fiddle with would be superrrrrrrrrrrrrrr :)

Thx

Offline Gambit

  • Forum addict
  • *
  • Posts: 4,354
Re:Idle speed.
« Reply #1 on: 02 December 2003, 13:44 »
aye disconnect the red wire on the coil to disable the ISV (if your ISV is working the revs will plummet) & disconnect the breather hose on the air box

Offline Gozza

  • I live here
  • *****
  • Posts: 1,417
Re:Idle speed.
« Reply #2 on: 02 December 2003, 13:47 »
breather hose, is that the one that branches off to the right and goes along with the ht leads :)

And the wire I need to disconnect is that at the top right if the engine bay ?

Offline Gambit

  • Forum addict
  • *
  • Posts: 4,354
Re:Idle speed.
« Reply #3 on: 02 December 2003, 13:54 »
no. it comes out of the actual top of the airbox and runs into the front of the block.

the other pipe is the vacumm used by the ISV

have a look here:-

here

its the thick black pipe u see below the injectors on top of the airbox, and running behind the alternator

also this is a good read for setting up a 16v:-

setup a 16v
« Last Edit: 02 December 2003, 13:57 by Gambit »


Offline Gozza

  • I live here
  • *****
  • Posts: 1,417
Re:Idle speed.
« Reply #5 on: 04 December 2003, 17:25 »
Not yet tried this, but wanted to keep me post at the top so I dont lose it :)