« previous next »
Pages: [1] 2

Author Topic: electric window/fuse box  (Read 4074 times)

Offline Haribo!

  • I live here
  • *****
  • Posts: 2,327
electric window/fuse box
« on: 26 April 2006, 11:41 »
im adding electric windows to my driver, do i need to change anything on my fusebox or will it already be there?
Logged

Offline rubjonny

  • 10k hero
  • *
  • Posts: 16,349
  • Hello, my name is John and I'm a dub addict.
Re: electric window/fuse box
« Reply #1 on: 26 April 2006, 12:14 »
you will need everything I'm afraid!
Logged
Hello my name is John and I'm a dub addict.

Offline Haribo!

  • I live here
  • *****
  • Posts: 2,327
Re: electric window/fuse box
« Reply #2 on: 26 April 2006, 13:40 »
what exactly is "everything"  :undecided:
Logged

Offline Haribo!

  • I live here
  • *****
  • Posts: 2,327
Re: electric window/fuse box
« Reply #3 on: 26 April 2006, 13:42 »
ive got the switches, and ive got the looms, and all the mechs on the way, got it all pretty cheap too,  :smiley:
Logged

Offline rubjonny

  • 10k hero
  • *
  • Posts: 16,349
  • Hello, my name is John and I'm a dub addict.
Re: electric window/fuse box
« Reply #4 on: 26 April 2006, 13:48 »
'everything':
Both mechs
Both switches
Relay & fuse
Loom from fusebox to switches & motors

:)
Logged
Hello my name is John and I'm a dub addict.

Offline Haribo!

  • I live here
  • *****
  • Posts: 2,327
Re: electric window/fuse box
« Reply #5 on: 26 April 2006, 14:16 »
Both mechs , On the way
Both switches, Got
Relay & fuse, will the fuse position be there ready to put the fuse in and what number relay is it?
Loom from fusebox to switches & motors, Loom on the way, does it plug into the fuse box? where?

 :undecided: :smiley:
Logged

Offline rubjonny

  • 10k hero
  • *
  • Posts: 16,349
  • Hello, my name is John and I'm a dub addict.
Re: electric window/fuse box
« Reply #6 on: 26 April 2006, 15:07 »
relay & fuse clip to the top of the fusebox, to wire it in you'll need to run a live, ignition live & earth to your fusebox somewhere.  Earth is easy, just run it to the earth claw.
If you have an early MK2 (hazard on dash) there are 2 groups of spade connectors on the back of the fusebox at either side, 1 live the other ignition live, so thats dead easy.
If its a late MK2 plug the live feed into plug Y pin 2, but the ignition live is a bit more tricky, the correct location is plug D pin 9 see:
http://www.bentleypublishers.com/tech/vw/bentley.vw.fuse.panel.rear.1989-1997.htm

Edit: In both cases the live feed should be fused, the stock setup uses a special thermal fuse.
« Last Edit: 26 April 2006, 15:11 by rubjonny »
Logged
Hello my name is John and I'm a dub addict.

Offline Haribo!

  • I live here
  • *****
  • Posts: 2,327
Re: electric window/fuse box
« Reply #7 on: 26 April 2006, 15:15 »
ok.... so in additon to the mechs switches moters and looms, i need to get a relay and fuse, what relay do i need? i think i kinda get it but no doubt ill come crawling back for help when i get lost in my fusebox,
Logged

Offline rubjonny

  • 10k hero
  • *
  • Posts: 16,349
  • Hello, my name is John and I'm a dub addict.
Re: electric window/fuse box
« Reply #8 on: 26 April 2006, 15:19 »
In theory they should come with the loom.  If the motors are in good nick you can actually wire it up without one, my kit was like that for nearly a year before I got a proper fuse & relay holder from a scrapped MK3!

Edit: The relay you need is any bog std switched relay, e.g. the type used for fog lights, headlight upgrade looms etc.
Wired up like so:
30 - permanent live (30amp or thermal fuse)
86 - to electric window loom
87 - ignition live
85 - ground
« Last Edit: 26 April 2006, 15:21 by rubjonny »
Logged
Hello my name is John and I'm a dub addict.

Offline Haribo!

  • I live here
  • *****
  • Posts: 2,327
Re: electric window/fuse box
« Reply #9 on: 27 April 2006, 02:59 »
right then, things are clearing up for me, where do i buy such a relay?
Logged
Pages: [1] 2
« previous next »