« previous next »
Pages: [1]

Author Topic: Info/advice needed  (Read 1330 times)

Offline Terrible1

  • Not said much yet
  • **
  • Posts: 26
Info/advice needed
« on: 11 April 2006, 11:59 »
I am in need of some help.

I am looking to upgrade my 1990 1.6 driver with a new engine.

Idealy i need an engine that will fit stright in 1.8 8v GTI. There are two types of this engine

Which type of engine is needed to fit

Will i need to replace the loom

Are the engine mounts the same as the driver.

If i replace the block and head on my current engine with that of a GTI will i have a GTI engine bar the injection, could leave injectors in and run it through a carb???

Any problems that i'm likely to come across

Gearbox wise is it a complete swap.

Has anyone done this before, i'd imagine so please could you PM me your details or if anyone knows of a "how to" "Walk through" on the net it would be greatly appricated.

Thanks :shocked:

Logged

Veedubgt18v

  • Guest
Re: Info/advice needed
« Reply #1 on: 11 April 2006, 15:01 »
seriously sell the driver and buy a gti cos a)the insurance will be more than if it was a factory gti, and b there is no point building something u can buy cos it wont be a gti.

why do u need to upgrade the engine? is the old one shagged or do u just want more power?
Logged

Offline Terrible1

  • Not said much yet
  • **
  • Posts: 26
Re: Info/advice needed
« Reply #2 on: 11 April 2006, 17:35 »
I just want more power.

This seems the best way to achive it.

I understand your point about buying a GTI to start with but their are so many "shagged" examples out there and you pay over the odds for a good un. The driver is in amazing condition low milage low owners just abit on the slow side. I have been meaning to do something to it for ages, now got enough funds to do a conversion but need all the info i can get.

Any ideas?



IMG]http://i17.photobucket.com/albums/b73/5t1g/boot.jpg[/IMG]
Logged

Offline Agreeable Slick

  • Global Moderator
  • Serious forum addict
  • *****
  • Posts: 7,076
  • Unit
Re: Info/advice needed
« Reply #3 on: 11 April 2006, 17:41 »
and what makes you think that changing the engine is going to stop the one you put in being shagged?

Just look for a good example of a GTI
Logged

Offline KKK

  • Not said much yet
  • **
  • Posts: 53
Re: Info/advice needed
« Reply #4 on: 11 April 2006, 18:16 »
If you want to change an engine for the 'fun', go for it.

If you want to drive a GTI, go buy one.  I was looking for a Driver, but ended up with a GTI because the Drivers were all so f**king expensive.

KKK
Logged

Offline T_J_G

  • Serious forum addict
  • *
  • Posts: 8,279
Re: Info/advice needed
« Reply #5 on: 11 April 2006, 18:44 »
If you've got a mint Driver...buy a new engine.

That's what i'm going to do!
Logged

Offline Terrible1

  • Not said much yet
  • **
  • Posts: 26
Re: Info/advice needed
« Reply #6 on: 12 April 2006, 08:36 »
So does anyone actually know if a GTI lump will drop stright in, do i need to change engine mounts or loom?
Logged
Pages: [1]
« previous next »