changed engine over but damn thing wont run- help

[SarahD]

well ive done it that way and that wont work, its turning slower than it was now

explain it step by step?

#1 on the head goes where?

and same for other 3 

[rubjonny]

#1 lead, runs to the dizzy terminal which matches up to the notch in the dizzy housing, or where the rotor arm is pointing when the engine is at TDC

Check the line on the crank pullet lines up with the arrow on the cambelt cover, and the punch mark on the back of the cam sprocket lines up with the top of the head with the rocker cover removed.

[Mr Blue]

if your timing is right. check your ignition moduel (the thing that sits ontop of the ecu)

ive fried mine 4 times

[jezza16v]

leads on the dizzy cap #1 top left, #3 top right, #4 bottom right, #2 bottom left..try that. Come back if it does not work.
Engine turning slower could mean the battery is getting flat!

[rubjonny]

Just to clear up ALL the confusion:

[NicolaLane]

thats bloody good that RJ!!!!

have you ever thought of trying out for BluePeter!!

[rubjonny]

 

[Veedubgt18v]

[SarahD]

Just to clear up ALL the confusion:

fookin lovin the picture!!!! gunna do that now, and come back when it dont work again lol

[SarahD]

no joy at all, still the same as it was, im ready to give up now mind, if my mate dont fix it tonight i may get the angle grinder out