« previous next »
Pages: [1]

Author Topic: Easiest way to take out 1.8t engine out?  (Read 1781 times)

Offline Chris#101

  • I live here
  • *****
  • Posts: 827
Easiest way to take out 1.8t engine out?
« on: 20 May 2013, 18:53 »
Howdo :smiley: got my replacement engine to fit and was wondering what was the easiest way to take it out?

I've got access to a set of lifting ramps, so my theory was to drop the engine and gear box still attached to the subframe on the floor, lift car up then fit new engine and reverse steps?

What have others done? :smiley:

Thanks
Logged


          2003 1.8T: R-tech Live Cutom Stage 2 remap: N249 Bypass : Forge T.I.P : Forge 007p  : Forge Actuator, yellow spring : Toyosports F.M.I.C : Toyosports C.A.I :                                                                   PCV simplified - oil catch can : 42' Draft 3" turbo back non res exhaust system : Devils own W.M.I : 231bhp & 258lbs-ft

Offline jonrandom

  • I live here
  • *****
  • Posts: 797
Re: Easiest way to take out 1.8t engine out?
« Reply #1 on: 20 May 2013, 20:01 »
Id say your better off dropping the subframe getting it out of the way along with the driveshafts. The whole front end comes off pretty easy so just crane it out the front.
Logged

Offline mcgee9t2

  • I live here
  • *****
  • Posts: 3,289
Re: Easiest way to take out 1.8t engine out?
« Reply #2 on: 20 May 2013, 23:08 »
Quote from: jonrandom on 20 May 2013, 20:01
Id say your better off dropping the subframe getting it out of the way along with the driveshafts. The whole front end comes off pretty easy so just crane it out the front.

that's how ide of thought it would be easiest taking it out the front rather than below... chances are your going to take the bumpers etc off for access anyway.
Logged

Offline rio_gti

  • I live here
  • *****
  • Posts: 2,298
  • "i'm not spending any money on it" Got a Hybrid!
Re: Easiest way to take out 1.8t engine out?
« Reply #3 on: 20 May 2013, 23:29 »
This is by far easier..... And quicker

http://m.youtube.com/watch?v=e5MZcxZdZdw
Logged


2000 GTI 1.8t ARZ, S2000 filter, DSG intake, Forge 007 dv, Catch can, R-tech custom remap, 3" Supersize Silicone TIP, Powerflex dog bone, 'The Beast' FMIC, Ultimate delete, LCR fuel pump, 3" Turbo back, K03 hybrid, Ported Manifold, S3 injectors, 80mm maf = 280bhp 270lbft :evil:

Offline shaft69

  • I live here
  • *****
  • Posts: 1,790
Re: Easiest way to take out 1.8t engine out?
« Reply #4 on: 21 May 2013, 22:17 »
Hahaha golf 20vt is pretty easy try doing it in Audi TT twice the job.
Logged
MK4 1.8t bored/stroked 2.0lt AEG crank, 83mm supertech pistons, intergrated rods, ACL race brgs, Flowed large port head, Supertech valves, All ARP bolts, GTX2871r turbo, Tial wastegate, 3" pipewerx dp, REVO stage 3 tune, Direct port water meth, MORE TO COME!!! Ready to go racing
Owner of bndynamix ltd. BMW and mini specialist
184 Wallgate, Wigan
WN3 4AL
07966492823.

Offline thai-wronghorse

  • Serious forum addict
  • *
  • Posts: 7,325
  • mk1 Seat Leon FR TDI
Re: Easiest way to take out 1.8t engine out?
« Reply #5 on: 21 May 2013, 22:29 »
Logged

Offline mar_k

  • I live here
  • *****
  • Posts: 806
Re: Easiest way to take out 1.8t engine out?
« Reply #6 on: 22 May 2013, 21:01 »
Having recently done this, We whipped the front end off,
Undone both the drive shafts at the flanges, disconnected everything and pulled it out the front.
Didn't touch the subframe at all.



« Last Edit: 22 May 2013, 21:07 by mar_k »
Logged

jamie16v

  • Guest
Re: Easiest way to take out 1.8t engine out?
« Reply #7 on: 22 May 2013, 21:33 »
Quote from: rio_gti on 20 May 2013, 23:29
This is by far easier..... And quicker

http://m.youtube.com/watch?v=e5MZcxZdZdw
haha,, brilliant.. was half expecting that though  :grin: :grin: :laugh:
Logged

Offline brianpologti

  • Here all the time
  • ****
  • Posts: 444
Re: Easiest way to take out 1.8t engine out?
« Reply #8 on: 23 May 2013, 13:04 »
As above , u can pull the front off , easier to get to connects etc etc
Logged
Pages: [1]
« previous next »