focal speaker mk6 upgrade kit info

[seabrook132]

Cheers for the pics, install looks good, might have to add to the to do list

[Nino]

Sorry to revive an old thread but better than making another one! I just got a set of these 2nd hand and looking forward to fitting them, don't suppose anyone knows the Rivet size I need for these? 

Also, I wish they came with the speakers for the rear too.....

[Snoopy]

Fit some rivnuts and screws makes removing them easier later   

[Nino]

Fit some rivnuts and screws makes removing them easier later   

That is a good point........ Any recomendations on a Rivnut tool?

[Snoopy]

No idea, I used the one from work the last time i did it. 

[Nino]

No idea, I used the one from work the last time i did it. 

I went with one of these, hope its a good one. (Reviews seem good)
https://www.amazon.co.uk/Sealey-AK3985-Long-Arm-Threaded-Riveter/dp/B00E0I986U/?_encoding=UTF8&pd_rd_w=LrFjO&content-id=amzn1.sym.444ba109-cdf8-4a96-9f01-f73a5ebc80ca%3Aamzn1.symc.adba8a53-36db-43df-a081-77d28e1b71e6&pf_rd_p=444ba109-cdf8-4a96-9f01-f73a5ebc80ca&pf_rd_r=R7491F4TKF3KTV569555&pd_rd_wg=00j6d&pd_rd_r=7704c593-4135-4f50-b7a3-6c71b3a8d237&ref_=pd_gw_ci_mcx_mr_hp_atf_m


Do you recall what M bolts you used?

[Al1040]

Just a thought, would a well nut work in this instance esp as there is very little load? This would negate the need to buy the riv-nut tool.
https://www.amazon.co.uk/Oniissy-Universal-Windshield-Neoprene-Motorcycles/dp/B0CGJFMYXR/ref=sr_1_1?crid=16HXJ6HUFJ4W&keywords=well+nuts+m6&qid=1707389785&s=diy&sprefix=well+nut%2Cdiy%2C99&sr=1-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1

[Nino]

Just a thought, would a well nut work in this instance esp as there is very little load? This would negate the need to buy the riv-nut tool.
https://www.amazon.co.uk/Oniissy-Universal-Windshield-Neoprene-Motorcycles/dp/B0CGJFMYXR/ref=sr_1_1?crid=16HXJ6HUFJ4W&keywords=well+nuts+m6&qid=1707389785&s=diy&sprefix=well+nut%2Cdiy%2C99&sr=1-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1

Good shout that, my only concern would be, how to you stop it from turn when getting to the tightening point

[Snoopy]

No idea, I used the one from work the last time i did it. 

Do you recall what M bolts you used?

Again as I had access to lots of duckets of nuts, waters, screws, bolts etc I used what worked. Cannot remember what size they were sorry.

[Nino]

No idea, I used the one from work the last time i did it. 

Do you recall what M bolts you used?

Again as I had access to lots of duckets of nuts, waters, screws, bolts etc I used what worked. Cannot remember what size they were sorry.

No worries