what clocks to use on a g60 conversion?

[antogoof]

so they are pretty rare as well then? how often do you get them in roughly?

[X4MGS]

so they are pretty rare as well then? how often do you get them in roughly?

Depends on what cars I get in or what I can drop on...

These clocks used to fetch £80.00 10 years ago, so prices have come down as such... Saw some listed on a VR6 thread from way back when...

[antogoof]

hmmm, ill have to keep an ear t`ground eh? might look at an astra gte conversion, used to love them clocks.

[Simeon]

I think you need CE2 (Single pin) 16V 160mph & 7.2 Rev limit clocks..


That's why they fetch over £100 a set...

No, for a G60 you want 8v Gti 6k red line clocks.

And 16v clocks sell for circa 20-30 quid.

[X4MGS]

I think you need CE2 (Single pin) 16V 160mph & 7.2 Rev limit clocks..


That's why they fetch over £100 a set...

No, for a G60 you want 8v Gti 6k red line clocks.

Thanks for the useful Info....

And 16v clocks sell for circa 20-30 quid.

Lets not start all this again....

CE2 16V clock are current selling for around £100.00 a set.... Go Check Ebay!!

AND I'm Not Selling Any.... Despite what is reported on another Forum

[antogoof]

I think you need CE2 (Single pin) 16V 160mph & 7.2 Rev limit clocks..


That's why they fetch over £100 a set...

No, for a G60 you want 8v Gti 6k red line clocks.

And 16v clocks sell for circa 20-30 quid.

i believe ive got a set of these, but they are on a speedo drive, where as the rado box i have uses cable change and a digi drive? anyone know where to get the cabe to mate the two?

[Dolly]

cant help too much, but i did one with mk 8v 90 spec clocks and a mk2 1.3 speedo cable. the box was cable change O2A is it.

[antogoof]

anyone got a pic of the drive on the box? im a bit confused as to where it goes!

[Simeon]

I think you need CE2 (Single pin) 16V 160mph & 7.2 Rev limit clocks..


That's why they fetch over £100 a set...

No, for a G60 you want 8v Gti 6k red line clocks.

Thanks for the useful Info....

And 16v clocks sell for circa 20-30 quid.

Lets not start all this again....

CE2 16V clock are current selling for around £100.00 a set.... Go Check Ebay!!

AND I'm Not Selling Any.... Despite what is reported on another Forum

I'm not starting anything mate. They may be advertised on ebay for £100, but luckily if one removes the 'ebay blinkers' one can buy them for a lot less.

To the OP, as above you can use a cable Speedo with an O2A 'box, have a little search and I'm sure there'll be a thread detailing how.

[Dolly]

http://forums.vwvortex.com/showthread.php?2510161-1.8T-G60-gearbox-mk2-cluster...

check this out pal, the picture halfway down shows where it goes, like i say i used a mk2 1.3 drive and it worked fine in my 8v clocks