Realistic thoughts about AGU stage 2

[jamie1989]

THS intercooler fitted

[jonrandom]

Good work looks good mate 

[Chris.]

Looks familiar!

[Wazzzer]

ah I forgot you sticking it behind a Bora bumper, doesn't look like there's as much cutting involved?

[jamie1989]

Haha I have to bum around the mk4 golf section  its just a even heavier and lardy Golf with a boot lmao

Yeah no cutting but bear in mynd I had the ebay one a few months ago an cut alot so today I had nothing to cut at all 

I told my mates and none of them believed I had a front mount haha thats the way I like it.

[Chris.]

stealth intercooler...FTW!!

I miss driving mine now.  Need some power back in my life apart from 1.6couldntpullyaforeskinback power

[jamie1989]

Yepp stealth FTW!!

16 pages already haha hopefully this will give the AGU boys a good idea of what to expect hey....

[Chris.]

248bhp 297lbft to beat

[rio_gti]

Looks good and quick fitting....... Don't suppose you took measurements befor you put it on     

[jamie1989]

Yeah very quick.

Yeah mate I looked at it yesterday and tried thinking of a way to measure the pipes etc but one or two of them would defo need custom work.

Basically you have twin pass core, 1 x throttle body silicone (which can be used as standard), 1 x straight ali pipe with 45" bend which connects the throttle body silicone pipe and bottom core outlet, 1 x custom straight silicone pipe with 90" bend(this enter through slam panel from the core), 1 x 90" ali bend about 150mm length, another 90" bend (but silicone)which connects to either pancake pipe or your own custom pipe to replace the pancake.

I didnt take inside diameters as everyone is different but at a guess I would guess about 60mm
Here is the guide which will help you make a custom intercooler too

http://ths.snapalbum.co.uk/MK4%20cooler%20instructions.pdf

Hope that helps