Author Topic: quick turbo favour needed.. (Read 1124 times)

jamie16v · « **on:** 13 March 2012, 17:33 »

hello chaps, anyone who happens to have a turbo "off their car" and to hand, could you see how far the wastegate opens by hand (while still connected to the actuator).
thanks, jamie.

Toby · « **Reply #1 on:** 13 March 2012, 17:36 »

any turbo? iv got a ko3 in the shed

jamie16v · « **Reply #2 on:** 13 March 2012, 18:05 »

that`ll do just fine mate!

Toby · « **Reply #3 on:** 13 March 2012, 18:06 »

pull the acctuator open and see how much it opens inside?

jamie16v · « **Reply #4 on:** 13 March 2012, 18:07 »

yep, exactly that please mate

Dave_IOW · « **Reply #5 on:** 13 March 2012, 18:14 »

in degrees (roughly) or mm? Its on an arm isn't it?

jamie16v · « **Reply #6 on:** 13 March 2012, 18:16 »

degree`s or mm... the flap inside is what i `m looking for mate.. please!

Toby · « **Reply #7 on:** 13 March 2012, 18:17 »

i dont have nothing to measure it my van is in for a service, so i have a courtesy car

fook it! sorry pal!

jamie16v · « **Reply #8 on:** 13 March 2012, 18:20 »

a rough guesstiamate will do mate..

Toby · « **Reply #9 on:** 13 March 2012, 18:24 »

id say between 9mm and 12mm just looked, i can put my index finger flat in there.

GolfGTIforum.co.uk

Author Topic: quick turbo favour needed.. (Read 1124 times)

jamie16v

quick turbo favour needed..

Toby

Re: quick turbo favour needed..

jamie16v

Re: quick turbo favour needed..

Toby

Re: quick turbo favour needed..

jamie16v

Re: quick turbo favour needed..

Dave_IOW

Re: quick turbo favour needed..

jamie16v

Re: quick turbo favour needed..

Toby

Re: quick turbo favour needed..

jamie16v

Re: quick turbo favour needed..

Toby

Re: quick turbo favour needed..