I have a front/rear fader problem on the RNS510 .... Please HELP!!!

[am1w]

Bump again!!!!!
Any more help forthcoming, PLEASE?

[SteveP]

Its been coded via VCDS to say it has the sound system to change the outputs into low level so they can drive the amp directly.

[am1w]

Its been coded via VCDS to say it has the sound system to change the outputs into low level so they can drive the amp directly.

Thanks Steve.
But can I get the F/R fader back? The fitters don't have VCDS software, of this I am sure.

[AGB]

I thought you were talking about your wheels from your subject line... 

[am1w]

I thought you were talking about your wheels from your subject line... 

I have amended the subject heading. Thanks. 

[SteveP]

Its been coded via VCDS to say it has the sound system to change the outputs into low level so they can drive the amp directly.

Thanks Steve.
But can I get the F/R fader back? The fitters don't have VCDS software, of this I am sure.

As has been said in thread, the only scenario you don't have the fader is when you have the soundpack amp so they must have changed something. If you change it back you will cause issues as you will now be driving the amp with the high level speaker outputs rather than the low level outputs that the amp requires.

[am1w]

I realised this sort of. Now I get it. Thanks for your help.

[Buck]

Asker

As usual I'm late to the party  but isn't this because your front/rear fader and EQ is all being done by your new amp, bypassing the internal controls?

[am1w]

Asker
As usual I'm late to the party  but isn't this because your front/rear fader and EQ is all being done by your new amp, bypassing the internal controls?

Better late than never. 
I've got the solution. Coding on the RNS is scrambled possibly from day one. They did not re-code the unit either. Will be sorted during the week by the fitters when I have the new speakers fitted. All the internal controls work like R/L fader but the F/R fader facility has disappeared.