best place in northwest for a remap? 1.8T gti

[Carbon-Chiptuning]

how much are we talking for a remap? and what gains would i be looking at?

and whats the prices ?

Sorry dude, your car isn't in my area of knowledge, I'll talk to Nick in the morning regarding your car and let you know what he thinks would be best along with recognising your turbo type 

Our prices start at £275 but golf gti forum members get a hefty discount, all I ask in return for this discount is a small donation to the forum charity 

cheers mate, i know the later models where the k03s an the earlier the k03 but from what i know, mines on the cross over at 2000 X' reg ??.. so unsure as to what mine would be.. hopefully they can tell me..  like i said before, it was registered in october 2000 if that helps..

Hi There,

My name is Nick and i'm a colleague of Craigs (The Doc)

I deal with the 'performance tuning' side of Carbon - www.carbon-chiptuning.co.uk

Could do with a couple of bits of info to work out what Turbo you've got in your Golf and ultimately what we can offer you...........

Firstly, whats your Engine Code?

Secondly, is the car 'Drive by wire' (if you're not sure, have a look under the bonnet for a throttle cable or the absence of one!)

FYI: The earlier K03 cars usually make between 180-190HP

The later K03S cars more like 200-210HP

Please note the above figures are referenced from our Dyno Dynamics rolling road (affectionately known as 'The heartbreaker' due to its brutal honesty!!)

Any further tech questions please feel free to email nick@carbonst.com

Cheers,

Nick

[Carbon-Chiptuning]

how much are we talking for a remap? and what gains would i be looking at?

and whats the prices ?

Sorry dude, your car isn't in my area of knowledge, I'll talk to Nick in the morning regarding your car and let you know what he thinks would be best along with recognising your turbo type 

Our prices start at £275 but golf gti forum members get a hefty discount, all I ask in return for this discount is a small donation to the forum charity 

Craig, do you think you can ask Nick what kind of gains could be expected on a Mk1 Seat Leon Cupra R? The 225bhp version with the BAM engine found in the Audi S3

Hi Dom,

Hope you are keeping well........

LCR 225PS with 'BAM' should see 260HP No problem 

Please feel free to email nick@carbonst.com or give me a call on 07825 215 003 if you want any more info......

Take it easy,

Nick

[daz veedub]

golf_gti_turbo 2000 model will be k03

depending on what mods u got and how healthy the engine is u should make 180-190

mine made 197bhp and 223 torque with forge 007p dv, induction kit, decat and 3" downpipe, uprated tip and boost pipes

hope this helps remember a good service before going will also help 

[dom]

how much are we talking for a remap? and what gains would i be looking at?

and whats the prices ?

Sorry dude, your car isn't in my area of knowledge, I'll talk to Nick in the morning regarding your car and let you know what he thinks would be best along with recognising your turbo type 

Our prices start at £275 but golf gti forum members get a hefty discount, all I ask in return for this discount is a small donation to the forum charity 

Craig, do you think you can ask Nick what kind of gains could be expected on a Mk1 Seat Leon Cupra R? The 225bhp version with the BAM engine found in the Audi S3

Hi Dom,

Hope you are keeping well........

LCR 225PS with 'BAM' should see 260HP No problem 

Please feel free to email nick@carbonst.com or give me a call on 07825 215 003 if you want any more info......

Take it easy,

Nick

Thanks Nick

It'll be later in the year by the time I get around to buying one but the first thing I do will be to give you a call to arrange a time to sort it out

[dom]

Oh and if anyone has any doubts about professionalism of the guys at Carbon Chip Tuning or the accuracy of the rollers check out the thread below!

Click here.

[F17BAD]

how much is remap for the BAM engine   

[G0LF_GT1_TURB0]

golf_gti_turbo 2000 model will be k03

depending on what mods u got and how healthy the engine is u should make 180-190

mine made 197bhp and 223 torque with forge 007p dv, induction kit, decat and 3" downpipe, uprated tip and boost pipes

hope this helps remember a good service before going will also help 

cheers mate, mines just had a new clutch fitted and gear cable, and a full service..

5w40 fully synthetic oil
oil filter
fuel filter
spark plugs
mass air flow sensor
double piston/split forged dump valve - http://cgi.ebay.co.uk/FORGE-SPLITTER-SPLIT-R-DUMP-VALVE-BOV-VW-GOLF-GTI-1-8T-/320598129613?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item4aa5233bcd#ht_2214wt_948

and just in the middle of sorting an air filter out but unsure whether to go for a good panel filter (K&N/Pipercross) or an induction kit?

any recommendations  ?

what else should i do?

gunna get the cambelt done and possibly the other belts whilst its up and the water pump.. (just for piece of mind!)

any info/help would be great!

Ste

[The Doc]

Nick will answer your questions in the morning 

[dom]

Nick will answer your questions in the morning 

Craig, you still after a Gt TDi 130 to play with? If so i'll be more than happy to let you buy me one and then map the hell out of it for me?

Offer is there if you need it

[Carbon-Chiptuning]

how much are we talking for a remap? and what gains would i be looking at?

and whats the prices ?

Sorry dude, your car isn't in my area of knowledge, I'll talk to Nick in the morning regarding your car and let you know what he thinks would be best along with recognising your turbo type 

Our prices start at £275 but golf gti forum members get a hefty discount, all I ask in return for this discount is a small donation to the forum charity 

Craig, do you think you can ask Nick what kind of gains could be expected on a Mk1 Seat Leon Cupra R? The 225bhp version with the BAM engine found in the Audi S3

Hi Dom,

Hope you are keeping well........

LCR 225PS with 'BAM' should see 260HP No problem 

Please feel free to email nick@carbonst.com or give me a call on 07825 215 003 if you want any more info......

Take it easy,

Nick

Thanks Nick

It'll be later in the year by the time I get around to buying one but the first thing I do will be to give you a call to arrange a time to sort it out

No Worries Dom, just give us a shout when you’re ready.........