Leon Cupra Milltek Exhaust - Will it fit a MK4 Golf Turbo???

[sarahs_gti]

As title really, does anyone know if a Milltek stainless cat back system will fit straight onto a MK4 5 door golf turbo?

Ta

[ben1.8T]

Would have thought they would be slightly different easiest thing to do would be go to VW and ask at the parts department if they can print you off a picture of the exhaust parts diagram and do the same with Seat and compare the 2.

Hope that helps 

[coolio]

Easiest way is up ask miltek or go to their website and see have they got the same part number .... because is an aftermarket part there is a high possiblity that it with fit as they tend to design the exhaust to fit most 1.8t ..

[Grand Master Patch]

I doubt it,they look very different to me.

[Adam]

Cupra =



Mk4 =

[Grand Master Patch]

That's a definite no then,the lcr looks like it bolts onto the twin cat system to me.

[Adam]

Front hanging bracket on the backbox looks longer on the LCR. Also there is another bracket on the middle pipe on the LCR.

[vwprime]

As title really, does anyone know if a Milltek stainless cat back system will fit straight onto a MK4 5 door golf turbo?

Ta

I know where you have seen that   .
Im also on the idear that it will not fit without some sort of modding.

[Rhyso]

anyone actually checked the Milltek website? 

look here

http://www.roadrunnermotorsport.co.uk/index.asp?frame=/milltek-exhaust-volkswagen.asp

front axle and middle parts have the same part number 

[topher]

Would have thought they would be slightly different easiest thing to do would be go to VW and ask at the parts department if they can print you off a picture of the exhaust parts diagram and do the same with Seat and compare the 2.

Hope that helps 

award for the most complicated yet least useful reply of 2009 goes to... the dude with the vectra!