5x100 wheel spacers???

[chrissywood]

i got a mk3 gti on bbs rx2s 16" its lowered about 40mm but i want the wheels spaced out a bit more how much can i go??? how much should i go??


where can i get some cheap wheel spacers from???

[Wayne]

10mm really and don't use cheap spacers, venom or ebay is your best bet.

[boneybradley]

I will say max 12mm...but trim the plastic arches a little on the inside (if you run them) as 205 tryes will touch slightly!! (or fit 195's)

[nick_thomas]

My 195s rubbed slightly with 15mm spacers. Nothing horrendous but not what you want.

[topher]

I have a box load of 10mm hubcentric spacers. 57.1mm centre bore and they're 5x100 / 5x112 multifit for mk3/mk4/mk5. You'll need to get yourself some longer wheel bolts though (ebay!)

forum offer £40 a pair plus delivery! .. or you can spend 100 quid+ on h&r

[GTI-Steve]

Don't buy cheap spacers

And i would only recommend hubcentric ones, you can get wheel wobble, uneven tyre wear etc from ones that don't sit on the hub - the weight of the car is only supported on the bolts otherwise

There is chap on Ebay - ESP engineering, based in Crowborough, who makes excellent quality ones...

As far a show big a spacer you can fir depends on the ET of your wheels

mine are ET31 and i run 15mm spacers each at the rear and the arches don't catch as they're rolled and pulled slightly

[topher]

There is chap on Ebay - ESP engineering, based in Crowborough, who makes excellent quality ones...

That's who makes mine. Chap's name is Liam. I can do them a bit cheaper to forum members than he does on ebay as i got a box load.. like i said

[JackJack]

There is chap on Ebay - ESP engineering, based in Crowborough, who makes excellent quality ones...

That's who makes mine. Chap's name is Liam. I can do them a bit cheaper to forum members than he does on ebay as i got a box load.. like i said

Depending on my MOT I might have to take you up on that offer