FREE FREE FREE!! Rolling Road session with print out.

[Ben]

More pics soon at http://s258.photobucket.com/albums/hh252/Rtechremaps/

Nick

[Little JT]

Hi took the old girl down today and put it on the rollers and then took it back off again as she was alittle to low so with tophers we got the c spaner out and started turning the coils up about 40mm. Second time went on with no problems. nice and friendly atmosphere thanks again to all.

[topher]

For the record jon's car went on the roller with room to spare when the top of the front wheel arch was raised to sit exactly 23 inches from the ground.

90bhp from a 1.6 carb with a bit more to come once we get time to tweak the mixture down low, i was dead impressed!

[Jay]

Mines 24" from the ground to the top of the black arch trim and roughly 22" to the bottom of the arch, so should make it.
Won't be up that way until next Sunday, and even then I'm supposed to be going to a pissup BBQ

[topher]

think hard about that now jay... remember the dyno really gives your engine some stick, and its a long walk home

[Jay]

I'm not worried about the engine blowing up, I'm more worried about the 2nd gear crunch ruining the results 

[topher]

runs are done in 4th

we had jon's off the clock at 120mph in 4th

[RTechUK]

runs are done in 4th

we had jon's off the clock at 120mph in 4th

LOL.

It went way off the clock 6.5k in 4th it must have read 135mph on the clock  I will check the data and see what speed the rollers got up to.

I am worried about water pumps now..!!   Bloody Audi S3

[MrTurner]

Only just seen this..  More than happy to spend money on fuel down if I get a free rolling road session of some before and after tests!  Leon Cupra, AQU 

[Adam]

Could I come down in a few weeks time for a remap and RR session?

PD 130 MK4??