Author Topic: Spacers with 18s  (Read 2316 times)

Offline Ridg

  • I live here
  • *****
  • Posts: 2,851
  • TDI - Soot Happens!
Re: Spacers with 18s
« Reply #10 on: 29 May 2009, 15:04 »
i've seen a couple of MKIVs that had the rears out further than the front, so that the wheel was sitting more in the arch, looked really smart, but could mess up the handling.

Offline Car nut

  • Here all the time
  • ****
  • Posts: 496
  • The Black Beaver
Re: Spacers with 18s
« Reply #11 on: 29 May 2009, 15:38 »
I would do it as Steve has done, the same amount all round. Otherwise you will upset the track of the car. The fronts stick out slightly more than the rear because it is FWD. On RWD cars the rear wheels protrude more.

Change this and you risk upsetting the cars handling...

Good point Wazzzzzzzzer with 20s your gonna need fecking long bolts  :sad:

All extra weight.  :sad:
Daily Hack - '53 - AUM - GTI T  "The Black Beaver" :wink:
Playing with a  Black Beaver   :grin:  -  Updated  -  Wed, Jul 8 2009 4:56 PM 
BMW E39 M5 Individual '02- 400bhp - Sold but not forgotten !
Jaguar E Type S1 FHC 3.8 - Project car on my website in Profile

Offline sambo

  • I live here
  • *****
  • Posts: 1,057
Re: Spacers with 18s
« Reply #12 on: 29 May 2009, 18:47 »
15mm's on rear 5mm on front, no handling issues I can assure you, thats with 8.5j rims too. Does scrub over sharp dip's and bump's but only a touch.  :smiley:

Spacer's are no differant than smaller / larger offset wheels. Anything over 5mm requires longer bolts too suit (e.g 20mm spacers minimum 15mm longer bolt, think mine are 18mm longer)

HTH Sam  (still here just about)  :grin:
« Last Edit: 30 May 2009, 09:38 by sambo »
Sam



AXX power!  ..   Tinkering has started.... :smiley:

Offline Wazzzer

  • Moderator
  • 10k hero
  • *****
  • Posts: 11,170
  • Golf GTI 1.8T AGU
Re: Spacers with 18s
« Reply #13 on: 29 May 2009, 23:34 »
at the end of the day it's up to the individual, it's not something I would mess with personally


1999 1.8T: R-Tech remap - 225bhp/256lb/ft : K03s : THS FMIC : THS PCR pipe : 2.5" stainless exhaust : THS FR3 Engine mounts : G60/VR6 clutch : Calibra Yellow injectors : VR6 MAF : Devils Own WMI : Forge 007p : Carbonio CAI : Leon Cupra R Brembos : FK AK Street coilovers : Votex skirts : Anniversary front : click ---> http://www.golfgtiforum.co.uk/index.php?topic=92175