help with fog wiring...please

[mike.e]

trying to work out how the 'ell to install fogs on my valver. the lights went in a treat and luckily the two position switch is in place and wired up. All I need to is connect the loom to the fogs and the wiring 'plug'...

my question is, how on earth do I attach the wire to the No5 slot (as per the 'MFI' style instructions).

Apparently, this plug comes apart and I need to insert from the left side...can anyone assist...

Thanks!

[richellis]

Get a loom of a car with fogs and the switch. All you need is the loom from a plug on the top of the rad, (round n black) This includes the ind, headlights and the horn. replase with the loom of the car with the fogs, change the swich and job done! Factory fit!

[DrewGTI]

installed front fogs on my old gti no problems. . . .


done the same on my new one but the connecters that plug into the indicators wont fit as they are not square....


any ideas? 

[Andy-H]

I think the plug type changed after '95' so you may have a loom off an older car 

[DrewGTI]

hhhmmm. . thought this but the loom seems in way better nick than mine on  96..


the fogs, headlights and horn is fine. . just the indicators? 

[Andy-H]

Did me kid bro's on his 'P' plate that you saw and we had to cut the wires and re-connect the original connectors Mate 

The loom I bought was a minter as well............... must have been better looked after than mine 

[DrewGTI]

yeah, , guess will have to snip the wires and change them over. . . . . 

[Mikester]

I had to snip wires to fit my vento front.

As i bought a 94 front, and i have a 96/7 car.