I removed my induction kit today to clean the throttle body. i noticed i bit of gunk in the breather pipe. I took the whole thing off, starting near the throttle body, all the way down to where it goes into the bottom of the engine block. The whole pipe was full of yellow and brown gunk.
I decided to take the square cover on the top of the engine block off, no. 17 in picture below. Inside was a round filter type thing that looked like it was absolutely full of sh!t. So popped the top off it and i was right.
So....inside this filter is a rubber type thing that i found had a tear in it. I dont think your meant to take it apart because i had to superglue the top back on.
Anyway, i cleaned all the pipes and the filter put it all back together. The car seems more responsive for sure.
I now need a new filter thing, anybody know what they are called?
Also, what does the breather pipe do and why did it have oil in it?
Cheers
