VR6 into a Mk2 anyone??

[Jaymapp16v]

i have been playing with my car recently found few horrible problems, like big end shells shattered due to oil pick up blockage! so engine is coming out! a few things have sprung to mind like being able to drop a VR6 engine in! i can get one for free! but want to know how easy/hard it is what few things might i have to change etc! i have flicked through the boards and few people have asked the same questions but no reply, can anyone help me please?
Cheers jay

[golfpro]

have a look at VR6 ROB's project page as he has just done this. Its good reading! If you can get one for free then go for it!

[mk2madman]

If you car is post 90 then its almost plug and play.

your gona need the sub frame form a mk3 or corrado.

then your gona want uprated ARBs and a descent set of coil overs and a full set of puly bushs to get the handling back!

If you can get a vr6 engine and all anciliarys (gear box loom etc ) then youve got a result and there should be nothing stopping you! 

[Golf 2.9]

How we doing?

All i will say is make sure you get all the bits.

I have a mk2 gti with a 2.9vr6 conversion and who ever done it done half a job,as i am finding out know. Mechanically it was done well but electrically not so.

Trying to get the diagnostic plug to work, according to auto spark plug isn't recognising the sensors from the car or something like that.

So be careful as i have got my work cut out.

Graham

[Judderi]

This link may help

http://www.futrellautowerks.com/projects/89clvr6.htm