Author Topic: Help needed after changing dash  (Read 796 times)

Offline Steve_B

  • I live here
  • *****
  • Posts: 661
Help needed after changing dash
« on: 18 April 2006, 11:19 »
I swapped the dash on my 8v, and now the indicators and wipers don't work. I know I bent the stalks a lot when doing this as first tried to do it without removing them (don't try this at home!). The indicator stalk seems OK, but maybe something is now wrong with it. The green led on console is on faintly when I turn the ignition on, then goes on full brightness constantly when the indicators are on iether way. Hazards work though

With the wiper stalk, a load of springs and connectors flew out and tried to bodge them back together but wipers don't work now, can use the washers though.

Basically, do I need new stalks? I live in St Albans, if anyone can sort this out for me this week I would pay as I need the car desperately as I'm meant to be moving this week.

Offline Diluxe

  • Here all the time
  • ****
  • Posts: 494
Re: Help needed after changing dash
« Reply #1 on: 18 April 2006, 12:31 »
check you've plugged the connectors in on the back correctly, if yes then a trip to GSF/ECP would get you the stalks for about 15 quid each.......
1997 16V

Offline T_J_G

  • Serious forum addict
  • *
  • Posts: 8,279
Re: Help needed after changing dash
« Reply #2 on: 18 April 2006, 12:33 »
about 50 quid for a washer/wiper one from VW

Judderi

  • Guest
Re: Help needed after changing dash
« Reply #3 on: 19 April 2006, 14:25 »
ebay!

Offline Steve_B

  • I live here
  • *****
  • Posts: 661
Re: Help needed after changing dash
« Reply #4 on: 19 April 2006, 14:39 »
My thpught as well, watching a couple at the moment. If anyone can say whether the indicator problem is the stalk though would be appreciated.