« previous next »
Pages: [1]

Author Topic: trying a ecu swap cant even find my ecu pin help  (Read 1519 times)

Offline davemk4

  • I live here
  • *****
  • Posts: 694
trying a ecu swap cant even find my ecu pin help
« on: 25 May 2014, 12:57 »
So got vcds etc and trying to a ecu swap same engine etc and is a used ecu. Got the walkthrough where to put the pin from original into new but where on earth is the pin been at this for 2 hours now lol
Logged
2001 mk4 GTI 1.8t AUM. k&n induction kit with customer heat shield, 3'' TIP, Forge 007P, Stage 1 map, N249 bypass, 3'' downpipe and decat, 2.75'' Jetex cat back non res, Koni shockers and H&R springs 35mm, dimpled and grooved disks front and back

Offline Chris.

  • I live here
  • *****
  • Posts: 1,916
Re: trying a ecu swap cant even find my ecu pin help
« Reply #1 on: 25 May 2014, 13:31 »
need vag tacho.  Pin is stored in the ECU and the cluster.

You need the PIN (SKC) from the ecu your replacing it with or you'll have trouble.  Pretty hard to get too for immo 3 if thats what your running.
Logged

Click For Build Thread

248bhp  278lbft R - Tech Powered 1.8T!!  - Gone but NOT forgotton

Offline davemk4

  • I live here
  • *****
  • Posts: 694
Re: trying a ecu swap cant even find my ecu pin help
« Reply #2 on: 25 May 2014, 14:35 »
Immo2

So get pin from clocks then adapt the new ecu with the pin from clocks
Logged
2001 mk4 GTI 1.8t AUM. k&n induction kit with customer heat shield, 3'' TIP, Forge 007P, Stage 1 map, N249 bypass, 3'' downpipe and decat, 2.75'' Jetex cat back non res, Koni shockers and H&R springs 35mm, dimpled and grooved disks front and back

Offline Chris.

  • I live here
  • *****
  • Posts: 1,916
Re: trying a ecu swap cant even find my ecu pin help
« Reply #3 on: 25 May 2014, 14:42 »
Don't even need skc on immo 2 clocks.  Look on ross texh for immo 2 coding.  Set a value in ecu to 1 and it'll learn itself.
Logged

Click For Build Thread

248bhp  278lbft R - Tech Powered 1.8T!!  - Gone but NOT forgotton

Offline Chris.

  • I live here
  • *****
  • Posts: 1,916
Re: trying a ecu swap cant even find my ecu pin help
« Reply #4 on: 25 May 2014, 14:49 »
Logged

Click For Build Thread

248bhp  278lbft R - Tech Powered 1.8T!!  - Gone but NOT forgotton

Offline davemk4

  • I live here
  • *****
  • Posts: 694
Re: trying a ecu swap cant even find my ecu pin help
« Reply #5 on: 25 May 2014, 15:01 »
Im assuning it immo2

Im 2001 AUM y reg?
Logged
2001 mk4 GTI 1.8t AUM. k&n induction kit with customer heat shield, 3'' TIP, Forge 007P, Stage 1 map, N249 bypass, 3'' downpipe and decat, 2.75'' Jetex cat back non res, Koni shockers and H&R springs 35mm, dimpled and grooved disks front and back
Pages: [1]
« previous next »