« previous next »
Pages: [1]

Author Topic: Gearbox flanges  (Read 966 times)

Offline joshstanvw

  • GTI forum regular
  • ***
  • Posts: 166
Gearbox flanges
« on: 30 March 2014, 11:31 »
Hi all I have just fitted a new gearbox to the old girl and I have just realised the flanges that hold the driveshafts are too small is it easier to swap them from the old box or change the cv joints if so does anyone have any idea which ones I would need (I'm hoping there are only 2 flange sizes and the gearbox has the smaller one)
Logged

GTI is not a trim level. It is a lifestyle.
1999 1.8t AGU, KO3s, forge 007p, silicone tip and charge pipe, oil catch can, SS turbo back system, pipercross CAI, g60/vr6 clutch, 40mm apex springs, drilled and grooved discs, stage 2 remap.

Offline davidgtrr34

  • Here all the time
  • ****
  • Posts: 308
Re: Gearbox flanges
« Reply #1 on: 30 March 2014, 13:54 »
I would get the other driveshafts. You might be able to swap yours for the correct ones
Logged
2004 auq, 550cc injectors, gt3071r, adjustable fpr, ebc, fmic, sachs stage 2, walbro 255, 3" turbo back, 3" custom intake, n75 n249 sai delete.
http://s103.photobucket.com/user/davidgtrr34/media/Mobile%20Uploads/20140531_192129_zpsgud6vsfb.jpg.html

Offline joshstanvw

  • GTI forum regular
  • ***
  • Posts: 166
Re: Gearbox flanges
« Reply #2 on: 30 March 2014, 17:06 »
It turns out it was far easier to change the flanges took 10-15 mins hope that helps someone mine is all up and running again just tax tommorrow mot next week to worry about now
Logged

GTI is not a trim level. It is a lifestyle.
1999 1.8t AGU, KO3s, forge 007p, silicone tip and charge pipe, oil catch can, SS turbo back system, pipercross CAI, g60/vr6 clutch, 40mm apex springs, drilled and grooved discs, stage 2 remap.
Pages: [1]
« previous next »