Author Topic: Silicone Hose  (Read 1007 times)

Offline markgti1.8t

  • Here all the time
  • ****
  • Posts: 366

AGU fk coilovers Powerflex top mounts full 3inch decat turbo back viper induction kit fmic vr6 clutch g60 flywheel catch can 007 forge dv Power flex wishbone bushes  Power flex dog mount under brace JOM  ADJUSTABLE Drop Links Walbro 255lph INLINE Fuel Pump wmi now fitted WAITING TO FIT VR6 MAF SAAB RED TOP INJECTORS STILL TO BUY K300 TURBO  CON RODS LSD

Offline Nino

  • I live here
  • *****
  • Posts: 2,634
Re: Silicone Hose
« Reply #1 on: 21 September 2012, 07:57 »
its only a joiner, it looks like the sandwich part from the intercooler to me but I think its intended to go between metal pipes or something.

Like my badge? Get one here: https://www.golfgtiforum.co.uk/index.php?topic=291134.0
VW Car history - Mk3 1.8 GL - Silver - 5 door, Mk4 1.8t - Silver - 3 door, Mk4 R32 - Black - 5 door, Mk5 GTi - Black - 5 door, Mk4 R32 - Deep Pearl Blue - 3 door, MK6 2.0 TDI - Graphite Blue - 5 door, MK7 GTD - Solid Black - 5 door.
Current - MK6 GTi Edition 35 - Candy White - 3 door

Offline AaronGS

  • I live here
  • *****
  • Posts: 521
Re: Silicone Hose
« Reply #2 on: 21 September 2012, 09:29 »
Its about £8.50 for a joiner. It seems reasonable but not that cheap. Looks about same prices to the likes of what forge sell.

Offline Chris.

  • I live here
  • *****
  • Posts: 1,916
Re: Silicone Hose
« Reply #3 on: 21 September 2012, 13:49 »
Bit long at 25cm for a joiner isnt it?

Click For Build Thread

248bhp  278lbft R - Tech Powered 1.8T!!  - Gone but NOT forgotton

Offline AaronGS

  • I live here
  • *****
  • Posts: 521
Re: Silicone Hose
« Reply #4 on: 21 September 2012, 14:39 »
Bit short for much else too, at 250mm?
Could make 2 intercooler joiners from it I suppose, so in that regard, cheap. Mark, I presume (from other posts) that this is for the intercooler joins? 

Offline markgti1.8t

  • Here all the time
  • ****
  • Posts: 366
Re: Silicone Hose
« Reply #5 on: 21 September 2012, 20:58 »
Bit short for much else too, at 250mm?
Could make 2 intercooler joiners from it I suppose, so in that regard, cheap. Mark, I presume (from other posts) that this is for the intercooler joins?

yes will be trying to find all there pipe work for this intercooler to fit the agu has any one got a list of the pipe work needed thanks

 http://www.ebay.co.uk/itm/310228624694?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649#ht_654wt_840

AGU fk coilovers Powerflex top mounts full 3inch decat turbo back viper induction kit fmic vr6 clutch g60 flywheel catch can 007 forge dv Power flex wishbone bushes  Power flex dog mount under brace JOM  ADJUSTABLE Drop Links Walbro 255lph INLINE Fuel Pump wmi now fitted WAITING TO FIT VR6 MAF SAAB RED TOP INJECTORS STILL TO BUY K300 TURBO  CON RODS LSD