catch tank? how can i fit one

[underground91]

Would someone please help me out with fitting a oil catch tank to my NZ engine code 1.3 engine..??
steps on how and where to connect the crank breather pipes and rocker breather pipe

thanks

[Diamond Hell]

Connect up your breather pipes and put them in the catch tank/Coke bottle.

Done.

Your huge engine will now no longer be breathing its own oily fumes.

[SoundillusioN]

Connect up your breather pipes and put them in the catch tank/Coke bottle.

Done.

Your huge engine will now no longer be breathing its own oily fumes.

 

Surly not in good health if it needs one!

My enormous 1800 hardly justifies one.

[tech1889]

Its a 1.3 whats the point ??

[Diamond Hell]

Its a 1.3 whats the point ??

Making the most of what you've got?

[SoundillusioN]

Not a guide for a MK2 but still, the principle is the same.

http://forums.vwvortex.com/showthread.php?3248273-***Oil-Catch-Can-DIY***

[underground91]

Connect up your breather pipes and put them in the catch tank/Coke bottle.

Done.

Your huge engine will now no longer be breathing its own oily fumes.

 

[underground91]

Connect up your breather pipes and put them in the catch tank/Coke bottle.

Done.

Your huge engine will now no longer be breathing its own oily fumes.

 

Surly not in good health if it needs one!

My enormous 1800 hardly justifies one.

ooh, so its not really a helpful thing, i thought loosing the oil vapours was something beneficial with a catch tank 

[SoundillusioN]

Connect up your breather pipes and put them in the catch tank/Coke bottle.

Done.

Your huge engine will now no longer be breathing its own oily fumes.

 

Surly not in good health if it needs one!

My enormous 1800 hardly justifies one.

ooh, so its not really a helpful thing, i thought loosing the oil vapours was something beneficial with a catch tank 

OK lots of sarcasm in this thread..... sorry....

all engines give off vapour but your shouldn't get too much.. is yours a problem?

[underground91]

well the vapour bit am not too sure on + the breather bit at the cylinder block is f**ked as is it got shredded somehow :/ 

Also as im planning on using a MK4 / 6N polo rocker cover i dont know if i would be able to have a oil breather pipe from the rocker anymore , or would there be another route the piping would take..?