SAI not working on AUM?

[RTechUK]

I am 100% sure I can get to the end of the 17705 fault for you,

Cheers Nick, i'll get my ass in gear and get some cash together, i'm thinking a Milltek cat-back and a smoke test 

In Golf+ magazine we have 12% off the prices of Milltek exhaust with free fitting, but as and exsisting customer I am sure if you give Pip an call in the office he will do you a much better deal..

[Waffs1984]

Sweet! Cheers Nick, will be in touch with Pip soon 

[Mr_Orange]

I'm still planning this clean up job on our AUM.

The coolant has to be drained and the coolant flange removed to get the combi-valve off to fit the blanking plate, aye?

[simon20vt]

i'm getting a similar problem on my aum, makes that horrible noise for a bit when first started. However, when its freezing cold it doesnt make the noise, almost as if the seals have gone or it has worn loose, therefore when frozen, a gap/hole closes back up? can anyone advise? cheers

[RTechUK]

i'm getting a similar problem on my aum, makes that horrible noise for a bit when first started. However, when its freezing cold it doesnt make the noise, almost as if the seals have gone or it has worn loose, therefore when frozen, a gap/hole closes back up? can anyone advise? cheers

could be revits on the pump?  you can pop it to me if you want and i can take a look for you/

[simon20vt]

it's not particularly important at the moment as the noise doesn't really bother me unless its ruining anything? its a bit of a drive to you for just having a look, but i want you to map my car in the future, decided on r-tech instead of custom code - despite having midland vw around the corner from me

heard alot of good things about r-tech on here, and haven't really heard much about a custom code map from others, so don't really know what the difference would be. Plus the drive back from leicester would be very enjoyable 

[richw911]

i'm getting a similar problem on my aum, makes that horrible noise for a bit when first started. However, when its freezing cold it doesnt make the noise, almost as if the seals have gone or it has worn loose, therefore when frozen, a gap/hole closes back up? can anyone advise? cheers

http://uk-mkivs.net/forums/t/141240.aspx 

[simon20vt]

great stuff that is mate, good find!! cheers!!

[topher]

i'm getting a similar problem on my aum, makes that horrible noise for a bit when first started. However, when its freezing cold it doesnt make the noise, almost as if the seals have gone or it has worn loose, therefore when frozen, a gap/hole closes back up? can anyone advise? cheers

http://uk-mkivs.net/forums/t/141240.aspx 

written by our very own elusive administrator

[richw911]

i'm getting a similar problem on my aum, makes that horrible noise for a bit when first started. However, when its freezing cold it doesnt make the noise, almost as if the seals have gone or it has worn loose, therefore when frozen, a gap/hole closes back up? can anyone advise? cheers

http://uk-mkivs.net/forums/t/141240.aspx 

written by our very own elusive administrator