Well fitting a cambelt is not for the DIY guy thats for sure, you really would benefit from past experience, don't do the job properly, crank the engine, bend the valves. job well done there. Think thats the point TJG was making.
80% of your posts are total tripe, as they are mostly replies to sh1te posts created by the morons that, unfortunately this forum attracts.
But not every one possesses common sense or the ability to take things apart. Cambelt can be done by a competent DIYer but if you fall shirt of that get a garage to do it
what time is involved for the complete change including the water pump thanks