Author Topic: cars a bit grumpy ?  (Read 762 times)

Offline Dalo Harkin

  • I live here
  • *****
  • Posts: 2,070
cars a bit grumpy ?
« on: 16 October 2009, 18:48 »
Hi everyone,

I had an issue a few weeks ago as the engine was 'searching' a bit in terms of the revs and I had a read on here and on something it said unplug the MAF and see if it gets better, I did that and it did get better, so thought ok must be the MAF so bought one today and fitted it and it still does the same thing, any ideas?

It seems to be holding boost is there anything else that could cause it to be grumpy?
ARZ K03s, Oettinger Side Skirts, R32 front, Carbon stage 2, Forge 007p (yellow spring), Forge Actuator (yellow spring), Pipercross panel filter with DSG parts, N249 and N112 deleted, SAI deleted, Carbon canister deleted, Rear wiper deleted, Long Life turbo back custom exhaust with 200 cell sports cat, VR6/G60 clutch kit, Creation Motorsport TIP, Catch can, 'Wellycooler', K04 charge pipe, S3 ported inlet manifold - looks pretty standard on the outside though :)

Offline tg1

  • I live here
  • *****
  • Posts: 1,192
Re: cars a bit grumpy ?
« Reply #1 on: 16 October 2009, 23:15 »
you tried cleaning the throttle body? if you mean the revs going up and down a bit at idle

Offline dai-cymru

  • I live here
  • *****
  • Posts: 2,601
  • 1989 MK2 16V
Re: cars a bit grumpy ?
« Reply #2 on: 17 October 2009, 09:38 »
Did you buy a genuine MAF after market ones can be as bad as the one you take off.

Offline Dalo Harkin

  • I live here
  • *****
  • Posts: 2,070
Re: cars a bit grumpy ?
« Reply #3 on: 17 October 2009, 09:59 »
All sorted, cleaned the throttle body and all ok now, so I have a spare MAF  :laugh:
ARZ K03s, Oettinger Side Skirts, R32 front, Carbon stage 2, Forge 007p (yellow spring), Forge Actuator (yellow spring), Pipercross panel filter with DSG parts, N249 and N112 deleted, SAI deleted, Carbon canister deleted, Rear wiper deleted, Long Life turbo back custom exhaust with 200 cell sports cat, VR6/G60 clutch kit, Creation Motorsport TIP, Catch can, 'Wellycooler', K04 charge pipe, S3 ported inlet manifold - looks pretty standard on the outside though :)