Instument bulb replacment

[Niro]

Hi there

Should the dails for the heater and blower be luminated as the normal instuments? I susspect a bulb has blown as everything else lights up like a Xmas tree and these controls don't.

Is it easy enough to replace.

TVM
Rach

[T_J_G]

Yeah turn the middle knob to the middle,cover with a cloth and pull out with pliers. Slightly tricky getting a new bulb in but
doable

[Niro]

Ta V Much

[Mr_Orange]

Once the knob is removed, aint there a trick shown in Haynes using a length of small bore silicon pipe to grip the bulb?

[northeast_gti-t]

Once the knob is removed, aint there a trick shown in Haynes using a length of small bore silicon pipe to grip the bulb?

there certainly is and makes it much easier to replace (well should do ) 

[Niro]

Once the knob is removed, aint there a trick shown in Haynes using a length of small bore silicon pipe to grip the bulb?

there certainly is and makes it much easier to replace (well should do ) 

Ok I don't have any small bore silicon pipe.
Would this be the stuff used for air pipes etc and would halfords sell it?
I am gonna have to get a haynes I think 

[northeast_gti-t]

Once the knob is removed, aint there a trick shown in Haynes using a length of small bore silicon pipe to grip the bulb?

there certainly is and makes it much easier to replace (well should do ) 

Ok I don't have any small bore silicon pipe.
Would this be the stuff used for air pipes etc and would halfords sell it?
I am gonna have to get a haynes I think 

any small sized bore hose will be fine mate 

haynes manual mmmmmm =much use as a chocolate fireguard tbh

[ABOO]

Use a straw from a Ribena carton pal.



Works a treat

[Mr_Orange]

Use a straw from a Ribena carton pal.

Works a treat

Like it!!!!!!!

[ABOO]

Wait till you try it mate. Might get a load, and go on Dragons den!!!!