Pictures of rear valances required

[Mikester]

there is an uber rare us spec rear valance, that looks oem, and the tits. If you can find one, let me know

[mmollart]

Thats my old car lol

Its the Votex rear valence, i believe VW sold them as aftermarket kits, not that easy to come by these days tho

[bungwa]

I had to test fit my exhaust to get an idea of where the valance needed to be. It'll need to come back off tomorrow. I started out with a piece of 6mm ply which I sealed and bonded with fibre glass paste and screwed temporarily in place to hold the weight. A couple more skims of glass paste and a good rub down.

It was then time for a couple of light skims of filler.

Tomorrow the exhaust will come off and i'll need to scribe my finished bottom edge, only then will I be able to decide wether I like it or not. I do have a spare if I don't. Should end up quite subtle.

[Mikester]

Should be able to get that exhaust higher than that
. Mine is unswept and sits in the valance fine

[mmollart]

theres always one of these
http://www.swgmotorsport.com/asps/ShowDetails.asp?id=77

[VR6-Joe]

All good til it cracks lol