Hi guys,
Had had a MK2 16V which I was going to track some months ago, you guys were a great help, however I never finished that project seperation / divorce put pay to that, anyway, long story short I'm back and have just picked up a nice 8Ver.

The cars very tidy, I want to keep it as standard as possible and have a few questions;
1) What colour is this? (sorry it just says "Green" on the log book)
2) There's a little blue smoke on starting only, I'm told this is the valve stem seals and it's not a big problem just a little oil runs back into the pots when the cars standing and this burns off in a couple of seconds. After starting there's no evidence of any smoke at all. Is the valve seals a common problem?
3) See the pic below, all these button are marked for windows, however the rears are handles, should there be other buttons here or blanked switch covers?
4) Can the "computer" be reset, there looks like two buttons to be pressed next to the display but don't want to start proding around until I know what I'm doing, are there any instructions around.
5) Where's the oil temp sensor for the computer, the temp is not displayed so guess there's a wire off or duff sensor?
Thanks all!
