16v turbo inlets..

[jamie16v]

what inlet manifold`s could i get to fit, or would be a straight fit to the ABF head.. obviously the ABF one and i think the KR..
but i am after one that is suitable for forced induction applications and doesnt take up so much room like the standard 16v ones..
any ideas chaps?.

[danny_p]

audi  s2  one 20vt 5cyl with end cut off  or a 20vt 4 cyl one with the flange cut off and 16v one welded on.    the cut 4 cyl one is quite popular atm

[jamie16v]

4 cyl one with the flange cut off and 16v one welded on.    the cut 4 cyl one is quite popular atm

you mean the flange for the throttle body i guess?.. why use the 16v flange over the 20v one?. isnt the 20v one already used to F/I applicaitions?.

[danny_p]

i'm on about the bit that bolts to the head, use the 20v throttel flange with 2e throttel body that fits straight on 

[jamie16v]

right, i see, so the 20v inlet wont bolt onto the head unless all the flanges coming from the plenum have been cut off and 16v ones welded on?..