My windscreen washer pump has given up on me. This has forced me to look into a few things I had postponed.
My washer tank does not appear to be standard, instead of one pump with dual output there are two pumps, but only one of them is actually attached to the washer switch, pressing or pulling washer the frontscreen (when the pump worked).
The washer tank is larger (9.3 litres), and the second pump has a large bore outlet, it's attached to garden hose! and I haven't worked out where it goes yet (will look this weekend)
The pipe to the rear washer has no rubber end to help connect it to a replacement pump that I need to get.
The replacement pump won't be able to go where the old one was because it's to close to the battery no giving enough clearance (as the tanks larger)
I'm hoping to be able to put a new pump in place of the second unused one, while the gap here is large then the pump, the second pump appears to be the same size but has a collar around it, so I'm hoping to be able to use that.
I hope this makes some sort of sense, it's very weird.
Now to the questions.
1) What's the part number for the dual outlet pump that I need. (Does anyone have a spare one going?
2) Can I get the small section of rubber hose that goes from the end of the the pipe to the pump, what part number.
3) Would it be worth me getting a proper washer tank (again part number, does anyone have a spare?)
Thanks in advance.