« previous next »
Pages: [1]

Author Topic: clutch removal  (Read 998 times)

Offline Andy gti

  • Not said much yet
  • **
  • Posts: 77
clutch removal
« on: 29 October 2005, 20:31 »
Hi everyone
                i need some advice in how to remove a clutch and fly wheel so i can get to the crank oil seal.The car is an 85 Mk2 k-jet. and the clutch plate has star shape nuts would i need a special tool to do the job.

please any advice greatly excepted


Andy
Logged
[img]

Offline Dizzie

  • Forum addict
  • *
  • Posts: 4,882
  • Make friends with your fast
Re: clutch removal
« Reply #1 on: 30 October 2005, 11:03 »
yes. it's called a 'star drive' :D
halfords sell sockets to go on your ratchet. :)
Logged
Mk4 Golf 150PD

Offline Devon Joe

  • GTI forum regular
  • ***
  • Posts: 234
  • Liebe zum ropey Automobil
Re: clutch removal
« Reply #2 on: 30 October 2005, 23:47 »
yep a star drive fits- i did my clutch today.

Although the flywheel bolts have more indents than a star socket it works fine- i panicked today as i bought a set of star drives yesterday for this job and thought they wouldnt fit...phew!

Also the pressure plate is held on by 6 hex bolts, use a bar with a normal socket (splined not hex) on the crankshaft pulley to stop it turning- the bolts are torqued to 100nm and take some undoing!! :smiley:

Logged
If only my Volkswagen was as reliable as everyone else's...
Pages: [1]
« previous next »