Another idle issues thread.

[ians]

Just remembered mine used to do this when stopping at junctions and stopping on steep hills..i chased mine around for years...it ended up being the hall sender wires were hanging on by a thread further up the loom. You could try idling the car and moving the wires see if it cuts out? Just a thought hth

[Waspy]

Replaced the TB gasket yesterday, while I was at it I cleaned the idle screw and re-checked the breather grommet.

No improvement. Although I did notice there was minor damage to the grommet, nothing that looked like it would cause an issue, but I ordered a new one anyway. I will then re-do rub Johnny's guide and see where I get to.

[Waspy]

Update: It isn't the breather bung, although admittedly the old one I took
Off was in a much worse condition than when I last out it back on. Regardless, the new one mad no difference. Sigh.