Author Topic: Water Ingress......Nearly - Drivers door  (Read 901 times)

Offline Big Tone

  • I live here
  • *****
  • Posts: 1,254
Water Ingress......Nearly - Drivers door
« on: 16 November 2013, 19:32 »
Does anyone know the fix to this? its the only place water seems to collect,

Thought best to ask before ripping the door seal out.

Its very slowly starting to seep in and soak the rear footwell, the car is idle and has been for about 12 months.




****FOR SALE**** 11 Months MOT, 5 Months Tax - 1.8T AUM, Stage 1 map, Lowered 35mm on Jamex Springs, Smoothed Airbox, Pipercross Panel, Forge 007P, N249 Bypass, Silicon Breather Hoses,Silicon Vac Hoses, Top Mounts & Bushes All Round, Catch Can Install,  New Discs and Pads All Round, A Big Sub, A SH*TLOAD of Polishing and A Thirst For V-POWER! Profile/msg for info!

Offline barrym381

  • Forum addict
  • *
  • Posts: 5,932
Re: Water Ingress......Nearly - Drivers door
« Reply #1 on: 16 November 2013, 19:40 »
you need to re-new the seal round the panel behind your door panel  :smiley:

Offline navmk4gti

  • Forum addict
  • *
  • Posts: 4,453
Re: Water Ingress......Nearly - Drivers door
« Reply #2 on: 16 November 2013, 19:44 »
I would check the rubber around the door too  :wink:
theonestopLEDshop - upgrade LED lighting, car badges, wheel caps etc

Facebook/Instagram: @theonestopledshop
Website: https://www.theonestopledshop.com/

Drop me a message for more info and discounts!


Offline Big Tone

  • I live here
  • *****
  • Posts: 1,254
Re: Water Ingress......Nearly - Drivers door
« Reply #3 on: 16 November 2013, 20:14 »
Tar

****FOR SALE**** 11 Months MOT, 5 Months Tax - 1.8T AUM, Stage 1 map, Lowered 35mm on Jamex Springs, Smoothed Airbox, Pipercross Panel, Forge 007P, N249 Bypass, Silicon Breather Hoses,Silicon Vac Hoses, Top Mounts & Bushes All Round, Catch Can Install,  New Discs and Pads All Round, A Big Sub, A SH*TLOAD of Polishing and A Thirst For V-POWER! Profile/msg for info!