Author Topic: Gear linkage relay arm help  (Read 1108 times)

Offline sierragls

  • Not said much yet
  • **
  • Posts: 51
Gear linkage relay arm help
« on: 26 March 2013, 21:18 »
When I replaced my clutch last week I wanted to replace the relay arm but I couldn't get it out. I removed the nut on the top, and the clip on the bottom, but then I couldn't get it out of the bracket, lifting it up pushing it down, I couldn't work out how to get it out. What ai missing? Do the plastic bushes in the bracket need to be removed to allow the replay arm to come out?

Offline northeast_gti-t

  • Serious forum addict
  • *
  • Posts: 6,554
  • "1.8T AGU"
Re: Gear linkage relay arm help
« Reply #1 on: 26 March 2013, 22:07 »
When I replaced my clutch last week I wanted to replace the relay arm but I couldn't get it out. I removed the nut on the top, and the clip on the bottom, but then I couldn't get it out of the bracket, lifting it up pushing it down, I couldn't work out how to get it out. What ai missing? Do the plastic bushes in the bracket need to be removed to allow the replay arm to come out?
Don't know if this may help but i found this http://www.edition38.com/forums/index.php?showtopic=174699
Was going to be refering to this when i sort out my linkage next week
2000 Mkiv GTi 1.8T AGU