creation motorsport picture help please

[cooki]

Creation have just got back to me and said that my pipe in question is a moulded pipe that replaces the T piece.
But on consulting an old thread isnt the PCV valve inside the T piece??so in theory i would be removing/by passing tbe pcv valve?
Does this sound right to anybody?

[cullygti]

it would appear it does bypass it mate as there wont be anywhere for the pcv to fit as for replacing item 5 is there another pipe in with the kit as that will only replace part number 2

[cooki]

it would appear it does bypass it mate as there wont be anywhere for the pcv to fit as for replacing item 5 is there another pipe in with the kit as that will only replace part number 2

No other pipe suplied mate so think they have got the wrong idea about this replacing pipe 5 also lol.i only realy need it to replace pipe no2 but im unsure again now as i dont no about bypassing the pcv valve??

[GTi_James]

if you want i'll be having my forge 'Y' pipe off and the 'S' pipe for the lower crank case breather, only done about 300miles, yours for £20 lol had to put it back on due to my catch can being faulty 

[cooki]

if you want i'll be having my forge 'Y' pipe off and the 'S' pipe for the lower crank case breather, only done about 300miles, yours for £20 lol had to put it back on due to my catch can being faulty 

Pm'd u buddy.
What pipe numbers are they please from the diagram on the 1st page i put up??
Obviously the Y pipe is no5 lol.

[GTi_James]

pm'd mate, and it has the part replacement numbers on them 

not bad seeing that i paid alot for them but they made me happy until i tore some of my other pipes and going down the catch can scene

[GTi_James]

pm'd mate, and it has the part replacement numbers on them 

not bad seeing that i paid alot for them but they made me happy until i tore some of my other pipes and going down the catch can scene

I believe they're numbers 5 and 2 I think. It's the upper and lower breather pipes

[oceanic-green]

I had this pipe on mine, until I ended up fitting a catch can. The pipe you have bought, is a replacement for 11 and 2 only, the metal tube goes in the end that connects to pipe 5, which you will have to purchase separately. I actually have one for sale, a black one if that is any good? 

+ the pcv valve still goes in the end on the T piece of the pipe you have, but not in the bit that goes to the sump. if you see what I mean

[cooki]

Thanks for the help guys but still not 100% on this.i have the metal connector to connect to pipe no5 so thsts fine. But at the other end do i replace the t-piece with my new pipe then conect pipe no1 and funny valve no8 in to my new pipe??