Ko4 upgrade help

[JoelBu]

Hi all,

Basically my turbo has blown up and looking to replace, so decided it would be a good time to upgrade to a ko4,
A member on here showed me a ko4 conversion kit on eBay ATM, and I was wondering if people could tell me if it looks ok??

http://www.ebay.co.uk/itm/221011157668?ru=http%3A%2F%2Fwww.ebay.co.uk%3A80%2Fsch%2Fi.html%3F_from%3DR40%26_trksid%3Dp5197.m570.l1313%26_nkw%3D221011157668%26_sacat%3DSee-All-Categories%26_fvi%3D1&_rdc=1#ht_5822wt_1026
That is the conversion kit.

http://www.ebay.co.uk/itm/VW-GOLF-MK4-1-8T-20V-FRONT-MOUNT-TURBO-INTERCOOLER-KIT-/310221942433?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item483aab2ea1#ht_965wt_689
Plus a FMIC, do you think that will be okay???

http://www.ebay.co.uk/itm/GOLF-MK4-EXHAUST-1-8T-CAT-D-PIPE-MILLTEK-NON-RES-T-/330555035480?pt=UK_CarsParts_Vehicles_CarParts_SM&fits=Model%3AGolf&hash=item4cf69d8f58#ht_9577wt_831
Plus a turbo back exhaust system,

Then I'll go down to rtech to get it mapped!

Do you think all of these together will work??
Is there anything else I might need???

Many thanks in advance!!!!

[Ashmond]

Two thing straight away: the joiners on the front mount kit are terrible and with a ko4 you will blow holes in them, take it from somebody that has done it so u will need braided couplets. The pipe work may not fit either as the turbo is in a different place.

With regards to the exhaust kit that decat won't fit as its single cat where the ko4 dowpipe splits in two. Can't see anything else ATM but on phone so can't really zoom in

[stfc_gti]

that FMIC is crap from what i have read, you wanna look at forge or THS

[JoelBu]

Hmm okay thanks,

So which miltek exhaust ( or other decent brand ) would I need to fit the ko4???

And anyone selling a ths or forge FMIC as im on a bit of a budget!!

Cheers

[Ashmond]

The exhaust is fine just the decat wont fit. I have a 2->1 scorpion decat pipe for my set up have a look at those. You will also need a reducer as the diameter goes from 2.75 inch to 2.5

Me and Toby both run the xspower fmic's (big) but only £100 but u do need to buy piping too. Works out about £250. Hope that helps. Have a look at my thread I got pics up of exhaust set up and Fmic from when I went to ko4, hope that helps

[Dalo Harkin]

Also from what I have seen on here a KO4 would require the FMIC tubing to be 2.5'' and nothing less.

[JimBR]

I think standard pipework is 2.25" so going to a FMIC with 2" pipework would probably do more harm than good.