Author Topic: fault code  (Read 1447 times)

Offline bez101

  • Not said much yet
  • **
  • Posts: 27
fault code
« on: 31 January 2012, 19:38 »
any ideas  anyone had the same code
i had it a few year ago on a a4 2.0fsiT ended up been the maf
changed for a good 1 on the GTI still the same
TIA

Tuesday,31,January,2012,15:32:53:27402
 VCDS Version: Release 11.11.1 (x64)
 Data version: 20111209

 --------------------------------------------------------------------------------
 --------------------------------------------------------------------------------
 
Address 01: Engine Labels: 06F-907-115-AXX.lbl
 Control Module Part Number: 1K0 907 115 HW: 1K0 907 115
Component and/or Version: 2.0l R4/4V TFSI 00 0070
 Software Coding: 0403000318070060
 Work Shop Code: WSC 00156 210 89782
 VCID: E3CEC567224E182
 1 Fault Found:
 008584 - Bank 1; System too Rich at Idle
P2188 - 008 - - MIL ON
 Freeze Frame:
 Fault Status: 11101000
 Fault Priority: 0
 Fault Frequency: 1
 Mileage: 138433 km
 Time Indication: 0
 Date: 2000.00.00
 Time: 14:50:06
 Freeze Frame:
 RPM: 827 /min
 Load: 22.7 %
 Speed: 12.0 km/h
 Temperature: 81.0°C
 Temperature: 18.0°C
 Absolute Pres.: 980.0 mbar
 Voltage: 14.097 V
 
Readiness: 0000 0000

Offline bacillus

  • I live here
  • *****
  • Posts: 1,231
Re: fault code
« Reply #1 on: 31 January 2012, 19:52 »
Is your car mapped?
Without traction power is nothing!

Offline bez101

  • Not said much yet
  • **
  • Posts: 27
Re: fault code
« Reply #2 on: 31 January 2012, 19:55 »
yes jabbasport map was on when i got the car