Intercooler Hard Piping

[Yohan]

Afternoon all,

I'm posting this in the remapping section as my car is currently down at R-Tech.

Although leak free, I've never really been happy with the amount of silicone in my pipework and with future plans of water injection it's not ideal to tap a nozzle in to.

Are there any places down that neck of the woods who can make up a couple of hard pipes for hot side/cold side which have minimal silicone joins?

Ideally there would only be 2 joins on the coldside (1 at chargepipe, 1 at IC) and 2 at hot side (1 leaving IC and 1 at the TB)

Cheers,

John

[0770rich]

never used these http://www.custom-chrome.co.uk/contact.htm but they are very close to r-tech.

hth

[golf-sib]

Try exhaust fabricators, some will have tools for mandrel bends and be willing to help. I got quoted £200 for a FMIC install with just the core supplied and all the piping made from stainless steel. But I went diy and it didn't work out cheaper, more hassle than its worth but I did get some tools in the process.

[topher]

tube engineering in milton keynes
01234 391991
nice guy, reasonable rates and very high quality stuff.

[golf-sib]

Hayes Engineering if in SE London/Kent

http://www.hayesdynotech.co.uk/

[Yohan]

Thanks guys!