how to remove bumper

[mcgee9t2]

need to take my bumper off, but the screws on the top are so rusted that i cant get it out, and one of them basically just disintergrated.


any ideas on how to take them off? gonna try coating them all in loads of wd40 and hope that helps, any other ideas as there all starting to strip and one of them just turns to dust as soon as you put any pressure 
cheers

[Kus]

I need to know how to get the rear off any guides on here?

[thatwillis]

One of mine snapped..

and the other just spins because the nut on the otherside has snapped.. I had to cut part of the bumper only 1 bolt holding i on now. 

Im guessing you will just have to cut/drill your way through. They have probs been untouched for a long time!

[scarr89]

If you can get any sort of purchase on the top of the screw head, even a mm or 2 get some mole grips or a good set of grips(water pump pliers) on it, try and turn it that way, worked for me in the past!

[mcgee9t2]

If you can get any sort of purchase on the top of the screw head, even a mm or 2 get some mole grips or a good set of grips(water pump pliers) on it, try and turn it that way, worked for me in the past!

good idea ill try that tonight and replace with better screws 

[Dave_IOW]

Theres a tool called an EZ-out made especially for removing sheared bolts 

Very handy 

[mcgee9t2]

Theres a tool called an EZ-out made especially for removing sheared bolts 

Very handy 

cheers dave, will have a look into that.